View Single Post
Old 08-19-2008, 05:14 PM   #1 (permalink)
growse
Knows Where the Search Button Is
 
Join Date: Jan 2008
Model: 9500
PIN: N/A
Carrier: Vodafone
Posts: 22
Post Thanks: 0
Thanked 0 Times in 0 Posts
Default 8310 on Vodafone UK: PAP auth error

Please Login to Remove!

I'm trying to tether my 8310 using bluetooth to Ubuntu. I've got my ppp scripts set up, and here's the output that I get:
Code:
Press CTRL-C to close the connection at any stage!
defining PDP context...
rAT

OK
ATH

OK
ATE1

OK
AT+CGDCONT=1,"IP","internet","",0,0

OK
waiting for connect...

ATD*99***1#

CONNECT
Connected.
If the following ppp negotiations fail,
try restarting the phone.

Serial connection established.
using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <auth pap>]
sent [LCP ConfAck id=0x0 <asyncmap 0x0> <auth pap>]
rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0x0>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0x0>]
Warning - secret file /etc/ppp/pap-secrets has world and/or group access
sent [PAP AuthReq id=0x1 user="web" password="web"]
rcvd [LCP TermReq id=0x1]
LCP terminated by peer
sent [LCP TermAck id=0x1]
rcvd [LCP TermAck id=0x1]
Connection terminated.

Sending break to the modem

PDP context detached
Serial link disconnected.
Can anyone shed any light on what's going on? It looks like vodafone are rejecting my PAP login request. I've tried to call them, but they're closed at the moment, but I don't think that dialup is disabled on my handset.

My ppp config:

Code:
# $Id: gprs,v 1.4 2004/04/28 08:40:32 mcfrisk Exp $
#
# File:
# gprs
#
# Description:
# Serial cable, IrDA, Bluetooth and USB pppd options for GPRS phones.
# See 'man pppd' for detailed option descriptions.

# Most GPRS phones don't reply to LCP echo's
lcp-echo-failure 0
lcp-echo-interval 0

# Keep pppd attached to the terminal:
# Comment this to get daemon mode pppd
nodetach

# Debug info from pppd:
# Comment this off, if you don't need more info
debug debug debug

# Show password in debug messages
show-password

# Connect script:
# scripts to initialize the GPRS modem and start the connection,
# wvdial command is for Orange SPV while other phones should work with chat
connect /etc/ppp/peers/gprs-connect-chat
#connect "/usr/bin/wvdial --chat --config /etc/ppp/peers/gprs-wvdial.conf radiolinja_usb_orange_spv"

# Disconnect script:
# AT commands used to 'hangup' the GPRS connection.
disconnect /etc/ppp/peers/gprs-disconnect-chat

# Serial device to which the GPRS phone is connected:
# /dev/ttyS0 for serial port (COM1 in Windows), 
# /dev/ircomm0 for IrDA,
# /dev/ttyUB0 for Bluetooth (Bluez with rfcomm running) and
# /dev/ttyUSB0 for USB
#/dev/ttyS0	# serial port one
#/dev/ttyS1	# serial port two
#/dev/ircomm0	# IrDA serial port one
/dev/rfcomm0	# Bluetooth serial port one
#/dev/ttyUSB0	# USB serial device, for example Orange SPV

# Serial port line speed
115200	# fast enough
#57600	# perhaps usefull with IrDA as some phones don't like 
        # speeds higher than this

# Hardware flow control:
# Use hardware flow control with cable, Bluetooth and USB but not with IrDA.
crtscts  # serial cable, Bluetooth and USB, on some occations with IrDA too
#nocrtscts # IrDA

# Ignore carrier detect signal from the modem:
local

# IP addresses:
# - accept peers idea of our local address and set address peer as 10.0.0.1 
# (any address would do, since IPCP gives 0.0.0.0 to it)
# - if you use the 10. network at home or something and pppd rejects it,
# change the address to something else 
:0.0.0.0

# pppd must not propose any IP address to the peer!
noipdefault

# Accept peers idea of our local address
ipcp-accept-local

# Add the ppp interface as default route to the IP routing table
defaultroute

# Newer pppd's also support replacing the default route, if one is 
# already present, when the GPRS connetion should be set as the default route
# to the network
#replacedefaultroute

# DNS servers from the phone:
# some phones support this, some don't.
usepeerdns

# ppp compression:
# ppp compression may be used between the phone and the pppd, but the 
# serial connection is usually not the bottleneck in GPRS, so the 
# compression is useless (and with some phones need to disabled before 
# the LCP negotiations succeed).
novj
#nobsdcomp
#novjccomp
#nopcomp
#noaccomp

# The phone is not required to authenticate:
noauth

# Username and password:
# If username and password are required by the APN, put here the username 
# and put the username-password combination to the secrets file: 
# /etc/ppp/pap-secrets for PAP and /etc/ppp/chap-secrets for CHAP 
# authentication. See pppd man pages for details.
# Example, Radiolinja operator pap-secrets: 
# "rlnet"         *       "internet"	*
user "web"

# The persist tries to reopen the connection if it is dropped. This
# is usefull for example with a Nokia 7650 which only manages to
# 'dial' with every second attempt or when the network likes to drop the
# connection every now and then. It's not fun when the over-night 
# 'apt-get dist-upgrade -d -y' fails constantly...
#persist
#maxfail 99

# Asyncmap:
# some phones may require this option.
#asyncmap 0xa0000

# No magic:
# some phones may require this option.
nomagic

# Require PAP authentication:
# some phones may require this option.
#require-pap
and my connect script:
Code:
#!/bin/sh
# 
# $Id: gprs-connect-chat,v 1.2 2004/02/02 23:19:28 mcfrisk Exp $
#
# File: 
# gprs-connect-chat
#
# Description: 
# chat script to open Radiolinjas GPRS service with GPRS phones. If ppp 
# negotiation stalls, try restarting the phone. To try with other GPRS 
# operator setting, change the PDP contex setting. The settings work with 
# most Ericsson models, but Nokia 8310 and 30 do not support QoS parameters 
# with AT commands, so just delete those lines and it'll work.
#
# Set PDP context CID=1, protocol=IP, APN=internet:
#AT+CGDCONT=1,"IP","internet","",0,0
#
# Set CID=1 QoS requirements from the network, not supported by Nokia:
# AT+CGQREQ=1,0,0,0,0,0
#
# Set CID=1 minimum acceptable QoS parameters, not supported by Nokia:
# AT+CGQMIN=1,0,0,0,0,0
#
# 'Call' CID=1 (activate PDP context one, perform GPRS attach):
# ATD*99***1#
#
# Some phones like the Orange SPV (yes, the Microsoft Smartphone) use this 
# dial string to start GPRS connection:
# ATD*99#
#
# The actual chat script:
exec chat 						\
	TIMEOUT		5				\
	ECHO 		ON				\
	ABORT		'\nBUSY\r'			\
	ABORT		'\nERROR\r'			\
	ABORT		'\nNO ANSWER\r'			\
	ABORT		'\nNO CARRIER\r'		\
	ABORT		'\nNO DIALTONE\r'		\
	ABORT		'\nRINGING\r\n\r\nRINGING\r'	\
	''		\rAT				\
	TIMEOUT		12				\
	SAY		"Press CTRL-C to close the connection at any stage!"	\
	SAY		"\ndefining PDP context...\n"	\
	OK		ATH				\
	OK		ATE1				\
	OK		'AT+CGDCONT=1,"IP","internet","",0,0'	\
	TIMEOUT		22				\
	OK		ATD*99***1#				\
	SAY		"\nwaiting for connect...\n"	\
	CONNECT		""				\
	SAY		"\nConnected." \
	SAY		"\nIf the following ppp negotiations fail,\n"	\
	SAY		"try restarting the phone.\n"
Offline   Reply With Quote