Join Date: Aug 2008
Carrier: Cincinnati Bell
Post Thanks: 0
Thanked 0 Times in 0 Posts
I was able to get rid of it finally by doing the following:
Downloads required: |
Desktop Manager v4.3 Available HERE
JL_Cmder, a batch file, compiled by d_fisher, from Blackberry Forums.com available HERE
And, the last, you have to find yourself. Please, don't pm or email or PIN or send smoke signals, lol.
The beta 4.5 OD for your Blackberry is VERY IMPORTANT to get, it's the only reason this works.
This has been tested with 4.5 on the 8310, by myself, and another member, who i hope posts up.
I got the idea, because the JL_Cmder command is for OS 4.3 devices, so i will say
Supported Devices: 8100, 8300, 8310, 8320, 8800, and if needed the 8700.
*The 8110, 8120, 8130, and 8330 can just download the JL_Cmder file, and use the resettofactory option*
**EDIT*** DELETE ALL 5 SERVICE BOOKS RELATED TO UNITE! PRIOR TO BACKING UP THE DEVICE!!
1. download and install the needed software, from the available links.
make sure to DELETE the VENDOR.XML file
2. BACKUP your device, using Desktop Manager.
3. Connect your BB and upgrade the software to BETA 4.5, no need to
backup, as we have a good one we just made, and it saves a bunch of
time, any release version is ok, as we are going to remove it later. Approx.
4. Open JL_Cmder, and use the RESETTOFACTORY option, #5. it will prompt
to type blackberry, as it IS GOING TO WIPE the device. Then it will popup
a RED screen, and prompt you to remove the battery!!( I removed the BB
from the PC, and remove the battery, wait 1min or so and reinstall it.
5. Once the device boots up, go to options>security>general, and see if says
**no services**. If so, thats good that means the IT Policy is
COMPLETELY gone. Then go to firewall, and make sure
there is no red lock, and you are able to toggle enabled/disabled.
6. using the add/remove programs, remove the 4.5 beta, as we don't want
that, we want the OFFICIAL release. Plug your BB into your PC, open
Desktop Manager and it will prompt you to load the 4.2 OS. Load it, Making
SURE not to backup and restore, and then let it take it's course.
7.Once the BB initializes, you can then repeat the steps in step 5, and if all is
good, then Restore from the file we made in step #2
A few hours, but NO IT POLICY!
No restrictions, no locked firewall, Nothing!!!