View Single Post
Old 03-21-2013, 03:41 AM   #3 (permalink)
geolab
Knows Where the Search Button Is
 
Join Date: May 2007
Model: Z10
PIN: N/A
Carrier: orange
Posts: 40
Post Thanks: 0
Thanked 3 Times in 3 Posts
Default Re: Z10 stuck @ Verifying Blackberry ID

hello, there seems to have a problem with the phone time and the server time, thus the phone blocks to verifying BB id.
To unblock only, remove SIM and boot on wifi, enter bb id.
if no luck, change date to one year further, reboot, the phone will start normally.
re-change date and reboot.
In both solutions, if you re-click on BB world, it will re-ask you for id and most probably re-block.
So what I did, was changed date, re-adjusted date and reboot.
Upon normal boot and all is fine without opening BB world, back-up all the phone.
cHeck what phone Hardware ID you have, mine is STL100-2

check on blackberry's page what Hardware ID you have, it is here:

http://btsc.webapps.blackberry.com/b...ListHelperImpl

For my phone STL100-2 the model I have needs 8700240A


Go to this page and download the latest os on bottom of page

BB10 OSes ← Open Source BlackBerry xxx8211; OSBB


in section Z10 Autoloaders: for my phone 8700240A, the loader is:

Autoload.10.0.10.261.0x8400240a.0x8500240a.0x87002 40a.exe.zip

This Loader is for STL100-2, STL100-3 and STL100-4

unzip and instal , making sure BB link is on your PC
All will go fluidly.
Unlike older BBerry, your apps and all do not need to re-input passwords and serials etc.
After a few days, in the HUB, you will receive an alert to upgrade to 10.0.10.90 or newer.
regards

Last edited by geolab : 03-21-2013 at 03:56 AM.
Offline   Reply With Quote
The Following User Says Thank You to geolab For This Useful Post:
Jagga (03-24-2013)