| | Re: Need help please ! Im an idiot, can see camera
You need to know the IP address of your network where the camera is installed. Not the sub IP address, the main address for the router on the network side. the home side is usually just IP addresses that are non network numbers such as the ones I show above. You need to log into the router and get the network address.
the router address example
Broadband IPv4 Address 22.214.171.124
Gateway IPv4 Address 126.96.36.199
Home address example on the router
Device IPv4 Address 192.168.1.254
DHCPv4 Netmask 255.255.255.0
DHCPv4 Start Address 192.168.1.64
DHCPv4 End Address 192.168.1.253
Your cams are on one of the home addresses like 192.168.1.99
to get to the cam from outside you need to assign a port to the cam on the router
this may be on the firewall configuration. There you assign a pass thru ip address with the port number
Service name Ports Device
Camera1 TCP/UDP: 8618 ip camera
You cannot configure the access from the cell phone. You need to configure the router.
You need to give more info on the type of router your using home and then more help can be offered.
__________________ If someone helps, tell them by clicking the Thanks buttonî
Z10 on BES Z10 on BIS