View Single Post
Old 03-28-2007, 02:21 PM   #20 (permalink)
jfanaian
New Member
 
Join Date: Mar 2007
Model: 8100
Posts: 13
Post Thanks: 0
Thanked 0 Times in 0 Posts
Default

I tried using 0.6 with the patch and it seems to actually do some thinking in the execution unlike before. The only problem is that MaxPower is still 100mA :(

This is the output from running bcharge:
Code:
Scanning for Blackberry devices...
Found...attempting to adjust charge setting.
1 device adjusted.
This is what lsusb -v says under the pearl device section:
Code:
Bus 001 Device 011: ID 0fca:0006 Research In Motion, Ltd. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        16
  idVendor           0x0fca Research In Motion, Ltd.
  idProduct          0x0006 
  bcdDevice            1.06
  iManufacturer           1 
  iProduct                4 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              4 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x06  EP 6 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Thanks again
Offline   Reply With Quote