View Single Post
Old 03-28-2007, 06:13 PM   #25 (permalink)
HuwSy
Talking BlackBerry Encyclopedia
 
HuwSy's Avatar
 
Join Date: Mar 2006
Location: Over the hills and far away...
Model: 9800
PIN: .
Carrier: Orange
Posts: 428
Post Thanks: 0
Thanked 0 Times in 0 Posts
Default

Im having a problem with my lowly old 7100t, i connect it and it doesnt seam to run bcharge automatically (during boot it says the UDEV rule is invalid and iv tried both forms within the rule file to no avail. but im using ubuntu 7.04 feisty fawn so i can expect a few strangnesses). But when i run bcharge manually as root it says its changed the charge state and looking in lsusb -v it says its at 500mA but the charge icon on my Bb vanishes after a second or so of connection regardless. The only way i can get any form of charge process is by leaving barrybackup open/connected, even then tho its only a slow charge. Any ideas?

Heres what lsusb gives:

Code:
Bus 001 Device 003: ID 0fca:0001 Research In Motion, Ltd. Blackberry Handheld
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0        64
  idVendor           0x0fca Research In Motion, Ltd.
  idProduct          0x0001 Blackberry Handheld
  bcdDevice            1.04
  iManufacturer           1 Research In Motion
  iProduct                2 Terminal mobile RIM
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)
then this is what it gives when connected to by barry backup:

EDIT: removed as its identical...
__________________
Huw - www.huenik.com
BB 9800

Last edited by HuwSy : 03-29-2007 at 09:59 AM.
Offline   Reply With Quote