View Single Post
Old 11-20-2007, 04:18 PM   #37 (permalink)
ssc351
New Member
 
Join Date: Jul 2007
Model: 7100t
PIN: N/A
Carrier: AT&T
Posts: 2
Post Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hey Guys,

I have a 7105t unlocked with Cingular (AT&T) service on an Ubuntu 7.10 Gusty OS. I can't get this thing to work...I am pretty sure it should work because I got it to work in windoze, doing a tethered modem. I got everything to compile fine and Barry and XmBlackberry both seem to be working (they reconize and connect to the device). What's funny is the very first time I ran it, it dialed an the whole bit but never connected...I messed around with that for a while and now no matter what I do I only get this output when running the call command:

sudo pppd call blackberry
Initializing
ATE
Connect script failed

I've tried messing around with putting [email address] in as the username and CINGULAR1 as the password but none of that works. I have also tried many diffrerent scripts from google but again nothing.


Here are my scipts:

ABORT BUSY ABORT 'NO CARRIER' ABORT VOICE ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT DELAYED ABORT ERROR
SAY "Initializing\n"
'' ATZ
SAY "ATE\n"
OK 'AT+CGDCONT=1,"IP","wap.cingular"'
OK 'AT'
OK 'ATDT*99***1#'
SAY "Dialing\n"

and...

debug debug debug
nodetach
/dev/pts/2
115200
connect "/usr/sbin/chat -f /etc/chatscripts/blackberry"
nomultilink
defaultroute
noipdefault
ipcp-restart 7
ipcp-accept-local
ipcp-accept-remote
# added this, so that it doesn't disconnect after few mn of innactivity
lcp-echo-interval 0
lcp-echo-failure 999
modem
noauth
nocrtscts
noipdefault
novj # refused anyway, no point in trying every time
usepeerdns
user ""
password ""

Here is the output from XmBlackBerry:

sync.c:sync_init(296) - rim-sync plugin not available. Unable to find plugin "rim-sync". This can be caused by unresolved symbols Sync disabled.
bb_usb.c:scan_device(1664) - bcdDevice 0104, 1 configurations
bb_usb.c:scan_config(1618) - bConfiguration 1 MaxPower = 500mA
bb_usb.c:say_hello(486) - Read 0 bytes of 7 from ep 81. Didn't hear hello. Resource temporarily unavailable No error
bb_usb.c:check_endpoint_pair(1435) - Couldn't say hello
serdata.c:initialize(237) - pty name. "/dev/pts/2"
XmBlackBerry.c:OptionPopupCallback(998) - GPRS modem device /dev/pts/2


Any ideas?
Offline   Reply With Quote