View Single Post
Old 07-15-2005, 06:31 AM   #8 (permalink)
jwaters
Talking BlackBerry Encyclopedia
 
jwaters's Avatar
 
Join Date: May 2005
Location: Michigan
Model: 7520
Carrier: Nextel
Posts: 265
Post Thanks: 0
Thanked 0 Times in 0 Posts
Default

The version that shows in the modules is 1.0.84

Mine do show under Application/modules, make sure you are looking for the three modules or .cod files you installed which were:

net_rim_bb_qm_peer
net_rim_bb_qm_peer_resource_en
net_rim_bb_smileys_default

You can delete them through javaloader. You connect your usb cable and then type:

javaloader -usb erase net_rim_bb_qm_peer.cod
javaloader -usb erase net_rim_bb_qm_peer_resource_en.cod
javaloader -usb erase net_rim_bb_smileys_default.cod

It's possible that you will get an error saying the module is in use. If you do, you can unplug from your usb cable, pull the battery and let it sit a minute. Pull up javaloader and type the first command in but don't hit enter. Plug your usb cable back in and put the battery back in. The unit will start to power up. When you see the arrows showing it's connecting, hit enter on the computer. That should get you in to where you can erase the modules before they are started up. Timing is everything! You may have to play with it a couple times to get it right, and you may have to unplug and plug back in a couple times to get the other files. If, when you hit enter it doesn't connect, you can hit f3 to put the last command you just typed back up and hit enter.
__________________
Pin: 4007E1C7
Offline