Blackberry GPS Accuracy Test: To test the GPS accuracy of the Blackberry 8800-series of products, please follow the steps listed below.
On your Blackberry, please select the Settings icon from the main screen. Next, select Options, then Advanced Options, then GPS, and highlight Device GPS (that's the embedded GPS chip). Next, go outside and away from any buildings/trees so that you have a clear view of the sky. Use the Blackberry's function/menu key to bring up the the pull-down menu that shows Refresh GPS. Highlight and select Refresh GPS. That will tell the GPS chip to scan the sky for GPS satellites circling the Earth. After a couple minutes, the GPS screen will be refreshed and it will show you the number of satellites that your Blackberry found. In addition, it will also compute the "Accuracy" that is being obtained by your Blackberry. Any application, including IntelliGolf, will only be as accurate as the GPS data stream that is being provided to it by your Blackberry's integrated GPS chip. While your results may vary, we have noticed that the Blackberry's internal chip varies in accuracy from less than 10 meters/yards to more than 10 meters/yards. Since 10 meters/yards is approximately the delta distance between clubs for most folks (e.g. 7 iron goes 155 yards, 6 iron goes 165 yards) it is very important for golf that the accuracy readings from your GPS receiver/chip are less than 10 meters/yards. Otherwise, you might find yourself hitting the wrong club. You can use the GPS Refresh routine multiple times to see how your Blackberry's embedded GPS chip responds at various locations (i.e. out in the open, under trees, etc). Once you have verified that the accuracy of your Blackberry's GPS chip is consistently less than 10 meters, please exit out of the GPS screens and return to your Blackberry's main menu.[/quote]

Just upgraded to the 8830 from a T650 and had Intelligolf on that. Great program! Am I right in presuming that you are doing this accuracy test from the Intelligolf program? I can't find anything to show me how accurate the chip is with BB maps etc. When I go to tools and select advanced options I can only select GPS on or off. No refresh option.
Let me know.
Thanks