I can't seem to get it to work. I am on 3.8 and use BWC. I have added all the Cingular APN, Username and password information referenced in Mark's post but am still getting a

"could not open tunnel - failed"

or

"Could not find service book entry for"

error depending on whether I select "Force MDS" in the opptions. Any help is greatly appreciated.

Thanks

Yea I actually got mine all set up today, I called Cingular but they weren't any help.

Within the TCP settings.
These were the settings that I used.
APN: wap.cingular
Username:
Password: CINGULAR1

Viola it worked. It is case-sensitive so remember that.

I am getting the same error codes:

"could not open tunnel - failed"

or

"Could not find service book entry for"

error depending on whether I select "Force MDS" in the opptions. Any help is greatly appreciated.


I also have the 7290

HELP PLEASE!!!!

I have an email into VeriChat. Hopefully they can provide more insight here, as it still isn't working for me even with the changing of the APN, etc. from isp.cingular to wap.cingular.

I am having the exact same problem. I had no luck with Cingular customer service. Would you please let me know if you solved the problem. If I can't get this fixed, I am sending this back -- I am still within the 30 day window. I am at my wits end.

Nothing yet.

There is a duplicate thread at:
http://blackberryforums.com/viewtopic.php?t=2082

Be sure you reboot after entering the TCP settings and verify that they are still there after the reboot.

Also, be sure you have good signal coverage as the timeout is weak on VeriChat.

djlin

do you have BES?

if you are like me, you don't have a bes. all i want is for verichat to work.

cingular customer service has not been at all helpful.

let me know what you find.

again, i am an individual user. no bes. no third party mds.

i am about to return this thing, as the prime reason i got it was for real time messaging.

at my wits end.

thanks

No - I am an individual user like you with no BES. So far PDAapps has send me a "Http Demo" test app to put on my 7290 to see if I can reach www.google.com with the test app. I cannot. However, I can reach the web using Cingular's browser. Strange.

Same problem here using 7290 / Cingular.

DJ and Mar

I tried calling cingular RIM customer service. The first guy I talked to was more than willing to add the wap.cingular access point to my account, and indicated that it would not increase my cost - stating that our unlimited data plans were wap. However, the system was down and he couldnt do it at the time. Of course, I don't think he followed up.

Follow up calls to customer service got the story that it would increase my cost to have that wap.cingular access point added.

Frankly, it seems rather insane. The unilimited media package for the TREO etc is 20 dollars, versus what we are paying, and they want to shaft us out of real time messaging? I have about 15 days left on my 30 day period, and really am thinking about returning it.

Verichat hasn't been that helpful either.

It does seem that myblackberry.com may work. It's a third party MDS that acts like a BES. Rejhohn's posts explains it well.

I've spent lots of time emailing back and forth with myblackberry's customer service. They are very, very, very helpful.

I am willing to use their service. However, I want to keep BWC for email as I am dsl at work, but dialup at home. Per their customer service, it's possible to keep the BWC for email, and to use them to avoid the limitations on what cingular provides.

I would prefer to use verichat. So, if either of you have any success, please let me know.

Thanks, and Happy New Year

Thanks. I'll keep you posted. I'm not sure I'm understanding why there is a problem. Do you have the "Unlimited BB" data plan? I do, so I don't understand why there is an issue.

DJ

I have the unlimited data plan too. If your verichate is working, would you let me know the settings? Or if you had to do anything iwth Cingular customer service?

Thanks. Oh -- I've tried all the settings in Rejohn's posting on this topic, but no luck.

We have solved this one for anyone reading this thread. Call up Cingular at 866 490 2666 and ask for wap.cingular to be added as an APN. Read the threads about the username & passwords here (do that) and then take the battery out of the device for a hard reset and then try it again. It should work, as this has worked for a few of us now.

I have a 7290 from Cingular and just got Verichat working.

Originally, I was not able to get Verichat (or xk72 SSH) working w/the settings in this thread. I was also receiving the "could not open tunnel - failed" message.

Using the following alternate TCP APN settings (Options->TCP) and then restarting (by powering off and removing the battery) did the trick:

APN: isp.cingular
Username:
Password: CINGULAR1

I am running OS v3.8

Ryan

Ryan, I tried your advise and it still does not work. I called Cingular BB support and asked them to add wap.cingular, but they said it is already on my account. I am getting the same 2 error messages as everyone else.

Anyone have any other suggestions????

Did you take out the battery and put it back in? I had to do this.

It is working on mine, and I am using these settings:

APN isp.cingular
Username for APN:
Password for APM: CINGULAR1

It is case sensitive. I have never been able to make it work with the wap.cingular APN. Others have. You might try asking them to add isp.cingular.

You can also try . I think I have discovered that "DA" in the one that I'm using is "Data Acceleration".

Also, take a look at "Features" on Cingular's web site. Mine look like this:

/WIX EXTENDED INTERNET $0.00
/WIX DATA CONNECT $0.00
WRLSS INTRNT XPRS PAY PER USE $0.00
XM WITH BB AND V UN $44.99

dozment is correct. If those lineitems are missing from your Cingular bill, you need to make sure they are added.

WIX means "Wireless Internet eXpress"

It may go under a different name in different states, such as California, but three lineitems definitely need to be there before works properly.

Check your Cingular account online to find out if these lineitems already exist.

I tried to get these lines added to my account but no one at Cingular knows how to do it.

Anyone know how so that I can explain to the Cingular rep how? I just spent over an hour on the phone and neither the customer service rep or data tech knew how to add the lines or why I could not SSH out.

I have the $45 / month XM With BB And V UNL plan.


Thanks

If you are in California, it's under a different name.

Basically, you need three line items that corresponds to the following:

1. A Non-BlackBerry data plan in addition to your data plan
   This gives you access to the wap.cingular "Access Point Name"
   This is called "Wireless Internet Express" (WIX) in certain states in USA
   
2. A tethered data plan, for hooking a cellphone to a computer to use as a modem.
   This gives you access to the isp.cingular "Access Point Name"
   This is the "Data Connect" line item.
   
3. The size of the non-BlackBerry plan
   This is the "pay per use' item. However, you can try a $5 non-BlackBerry plan

The trick is in talking correctly to the Cingular representative. You may need to make 3 phone calls before you reach the right people. Sometimes it's not "WIX" in certain parts of USA. But you definitely need non-BlackBerry data plans.

Try asking directly to have "wap.cingular" Access Point Name added to your account, as well as "isp.cingular". However, these items alone are not enough - You also need a plan size (like Pay Per Use, or $5 plan, or Unlimited). Basically you need three lineitems on your Cingular Bill that corresponds roughly to the three above bulletpoints. Once you've hit this magic combination, your Internet will work on your Cingular.

This is in addition to your BlackBerry plan, even if your BlackBerry plan is unlimited.

It's so tricky to talk in the right way to Cingular reps, and harder in certain states than other.

Thanks I will try it again today.

So since I am adding new data plans pay by use, will my Browser usage now be charged for while before it was unlimited since I only had the unlimited BB plan? I assume I will be charged for making SSH connections as well.

I am in Pittsburgh, Pennsylvania by the way.

Well after another 2 hours on the phone and them being clueless, I had them start adding anything that was free (although the Data person insists I need to buy a data plan for a minimum of $20 for 5 MB or $80 for unlimited).

I am now able to connect to the server and negioate keys via mipdssh, but my authorisation fails so I guess that is on my end.

OK - I know this may not work for everyone but this is what worked for me-

Instead of using changing the TCP options to wap or isp per the APN info in this thread, just type the word "proxy" on the first line of the TCP settings (under Options --> TCP). It is the field that has "APN:". Leave the other two lines blank.

I have a Verizon 7250 that I finally got Verichat to work on. After all that, trying to get Verichat to work on the ATTWS/Cingular 7290 has been a nightmare. I did not upgrade to 4.0. Just downloaded Verichat and kept getting the infamous "cannot open tunnel - failed" or it was looking for the "iPPP Service Book". Tried the WAP settings, the ISP settings, and rebooted as well as the other tips in this thread. Finally tried proxy (which I saw on CIngular's BB forum).

Try it - hopefully it'll work for you.

Thanks,
pdxchick