PDA

View Full Version : Blackberry 8700 Car kit


linuxpro
07-27-2006, 01:35 PM
just installed a THB Bury car kit and a hard wired cradle for my BB 8700 but have bad echo and feedback problems, has anyone come across this ? some help would be appreciated !!

Magnum
07-27-2006, 05:41 PM
If you go into the bluetooth settings does it have echo control settings? My wifes 7130 does, but my 7100 does not.

linuxpro
07-28-2006, 11:48 AM
Yea it has echo control but this isnít a Bluetooth car kit it's hard wired and charges the 8700 when in the kit, canít seem to find the problem all i know it has a really bad echo when in the kit, but thanks for the help!!

Magnum
07-28-2006, 03:31 PM
I don't know how the kit you used hooks up to your car, got the instructions you used to install so I can look at them?

You might be able to wire in a ground loop isolater to cut down and filter out any engine noise that may be happening from tapping power, and also illiminate the echo.........

linuxpro
07-28-2006, 04:09 PM
Thanks for the reply, It's not engine noise that i have the problem with it seems to be echo only and it's all the time whether the car is running or not,
The kit is a universal thb bury uni car talk thats installed then you just clip on the cradle that suits your phone in my case 8700 you can have a look at the kit here BURY TECHNOLOGIES GmbH & Co. KG (http://www.bury.com/technologies/GB/hands-free/1) and the cradle here BURY TECHNOLOGIES GmbH & Co. KG (http://www.bury.com/technologies/GB/hands-free/47/UNI_Take&Talk/BlackBerry/)

Magnum
07-31-2006, 10:23 PM
I looked at the links, and have a question:

- You had to tap off the car audio, right?

If this is the case, I would double check to make sure you have a good connection regardless if you cut and soldered or t-tapped.

I still think a ground loop isolater may help you out, because although they are primamrily used for engine noise they will clean up general hums or whistle you get in electronics.

Either way it's your call but I would check with manufacturer, check the tap and finally try a ground loop isolater.

Good luck with it.

linuxpro
08-01-2006, 08:26 AM
Thanks for the post Magnum

Yea i used an audio transfer loom from the back of the radio for power and so that the hands free kit will mute the radio and work of the car speakers, I have all so tried power from the battery as well after your last post but it's still there so i have picked up a ground loop isolater in the auto store to-day & i will try it to night and let you know if it still has a echo problem

rcasey
08-01-2006, 12:49 PM
Where did you buy the kit and were you able to install yourself. I have a Chevy Tahoe if that means anything.

Thanks, Ryan

linuxpro
08-01-2006, 03:57 PM
Hello Ryan

You can buy the car kit and cradle on expansys website and yes you can fit it yourself here are the liks below you will need to get a audio transfer loom from your local autostore


Buy a THB Bury UNI CarTalk Base Unit , #Vs86ucct05b800000-vo - eXpansys UK Limited (http://www.expansys.com/product.asp?code=128265)
Buy a THB Bury Blackberry 8707/8700v/t/r/g Take & Talk Cradle, #Vs8rib870tc0 - eXpansys UK Limited (http://www.expansys.com/product.asp?code=139259)


Regards