[b]BlackBerry Handheld Software v4.6.0.477
Both East Asian and Multilanguage file downloads are included below.
This will load to any carrier's 9000.

Software For BlackBerry® Bold (TM) 9000 smartphone

BlackBerry Handheld Software v4.6.0.477 (EastAsia)

Package Version: 4.6.0.477
Consisting of:

* Applications: 4.6.0.282
* Software Platform: 4.0.0.235
* File name: 9000jEastAsia_PBr4.6.0_rel477_PL4.0.0.235_A4.6.0.2 82_CSL_Limited_customers.exe
* File size: 97.68MB

Download the OS file (English + East Asian) here:
https://www.blackberry.com/Downloads...B42B2DBB8F27B6

Download the OS file (Multilanguage) version here:
https://www.blackberry.com/Downloads...761840F4BA6C53

1. Download the above OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.

The process takes about 45 minutes to an hour depending on how much data you have to backup and restore during the process. Once it's done loading the new OS it will reboot (it may do this twice during the entire process.) You will see a white screen with an hourglass for up to 20 minutes at a time while the AppLoader says "waiting for initialization."
If, for some reason, you end up with a white screen with small icons and the number 507, simply connect to the PC again and run Loader.exe again and it should load the OS to the device.

Previous OS version here:
http://www.blackberryforums.com/gene...ilanguage.html

I hope my bberry likes this better than .266!

Man you guys are fast... I just found it and see that, once again, you have beaten me to the punch... downloading now...

lol, we're fast? Or you're slow?

j/k, enjoy.

Does it matter that's east asia? Is the carrier trustworthy? thanks

OMFG.

For your information, impegio, first, I do not post links to "questionable" file downloads.

Second, if you read the first post you will find the download is FROM blackberry.com.

But you need to actually read and click on the download to know that.

Wirelessly posted (Hey I'm cool…)

LMAO

Wirelessly posted (Hey I'm cool…)

Is this any better than .266? I haven't really had any problems with .266.

penguin, you hit that one dead center, jsanders, nice catch. Now, I'm trying real hard not to do anymore upgrades until a 5.0 OS, but you guys just keep putting these updates out there, you're making it hard not to click the download link.

Struggling to look away and not click the link.....

Anybody making comments? Improvements, stability?

.266 works great for me.... (Except on drop calls.... that may be AT&T issue)

Thanks for the replies. understood.

Thanks. Downloading now.

You're excused

Never be afraid to ask questions here, just have thick skin for the replies.

Anyone else have to agree to some "BlackBerry Messenger License Agreement" when starting up BBM for the first time after upgrading to .282 ?

I did. As far as I can remember, I've never had to do it with any previous OS updates.

yes.

Who cares if it's better... it's newer!

Downloaded and about to install.
I wonder if there will be any more Os's for 4.6 with OS 5 on the horizon. Isn't .282 the last known beta?

that's interesting...

Installed and waiting for BES activation to complete.
I have done many OS updates and BES activation always takes forever. Right now it is about half way through the 1377 Application Permissions. It appears to be over the air, even though I am hardwired via USB cable to my network computer. I am on the 29th floor of an office tower and 3G is weak even though there are many cell towers around. It drops down to Edge because of the weak 3G signal. Being on Edge may explain why over the air activation takes so long.
Any way to speed up activation (via USB?) ?

Ok, I've caved, one more upgrade before the 5.0 series. I have just finish downloading and I'm now installing the software to my laptop.

Everything seems groovy so far. The messenger EULA was weird. After deleting the LbsConfig service book, BB Maps showed up fine on my device. Slacker lost all my cached stations, so now I need to re-download them. PodTrapper, on the other hand, kept its settings. Google Maps, in typical form, lost its favorites. Facebook works just dandy. Everything else looks normal. Hopefully, my batter will do a little better with this than it did with 266.

Finally completed the inialization process.
No complications on installation. Memory use may be slightly better, but may be just the fact that I have just completed the installation of a new OS.
3G signal strength seems similar at -110,to .266. Was hoping for an improvement.
Still too early for full evaluation.

Wow, I forgot what a pain it is to setup all of the apps / activation codes / configurations... but the deed is done. This time, for some reason, my profiles, ringtones, memos and calendar entries were missing following the upgrade. I resynched with Outlook and the memos and calendar entries came back. The ringtones were there, but I had to manually associate them with the address book entries... and I had to recreate the one special profile that I had set up for my office (pager setup)...

I don't know if the missing profile was caused by the upgrade (or by doing the upgrade), but none of it was major - except the pain of doing it all.

This OS seems to have given me another 125-150k of available memory - the amount is irrelevent, as it is directly tied to the number of apps / stuff you have loaded, YMMV - but what matters is the net change.

It also seems to be a bit snappier. I also just noticed that on the Bold, removing the voice dialing doesn't disable the Options/About screen. Nice.

I have upgraded, and I am happy.

Wirelessly posted

Installed, all apps work, and I reactivated on my BES all in under 1 hour.

Will monitor it now for performance, battery life and memory management.

Installing now....hoping for a little better battery life from .266. I am hoping that 5.0 comes out soon and this is the last 4.6 that I have to install.

Installing now also.

How did you get your BES to reactivate so fast ?
Mine usually takes about half a day.

yippee yay i read this in the morning when i woke up, i love you guys!

downloading now!!

why is it such a pain for you guys to do a new OS install? It takes me 5 minutes to get my BB setup after I get the new OS on it. Just sync all stuff with outlook and then resend service books. Change some ringtones and hide some icons, what is the big deal?

Unless your treating your BB like a iPhone clogging it up with pointless apps, I see no reason for it to be a pain.

Also I want to note .210 is probably the most snappiest build I have ever tried, it is not posted many places, but the menus are fast as **** on it for some reason.

Holy Snap, i just noticed this and this is the first OS that allows this.

After frying my Bold a couple of weeks ago while attempting to load 5.0.0.93...I had decided to hang with .266 until the "official" 5.0 came down the pike. But, like most of us, I got bored and was hoping for another 4.6 version to shake things up a little and give us an "upgrade-fix" to help the wait...so I'm stoked with .282...

Smooth install start to finish yesterday evening...no glitches at all. Probably the fastest process I've had yet. Things seem a little faster and smoother (but it always does after fresh install)...I'm at 40mb free space after battery pull and an overnight "settling"...and I'm going to set the phone to EDGE instead of 3G today for work and see how it handles calls, and see it the battery life is radically improved...

Anybody having WiFi issues?

Wirelessly posted

How is the boot up time. I swear if that alone was improved I would go through another upgrade!

BES activation for me take very little time - I just have to wait for our hosted service to open it up.

works grreeeeeeeeeeeeaaaatttttt for me! Can now srelect 2G and 3G! :D:D:D

I am sure that .266 didn't disable the About screen when voice dialing was removed... but either way, this is good...

Where is that option?

Manage Connections > Mobile Network Options.

Wirelessly posted (8310)

I can confirm this. I am using an AT&T branded, locked Bold and now I can select 2G & 3G or 2G. I am happy to see this option without having to debrand.

Now that's amazing! I wonder how it worked? As I and I guess everyone who knows about it thought it was not OS specific and was locked into the hardware?

Hi to All...just wondering:

1- Any WiFi issues???
2- Any multilanguage option??? I need English and Spanish spell check