The instruction contained in this post have been confirmed to work with the following BlackBerry devices:
8310, 8900, 9000
Tethering w/ Mac via USB BlackBerry Tethering via USB on a Mac Thanks adileoxfxanis!
Tethering w/ Mac via Bluetooth NOTE: When using an OS 220.127.116.11+ you must perform the PPPD Replacement procedure (this is not needed on Mac OS 10.6). Instruction found here:
Et-Setera » BlackBerry Bold PPPD Replacement.
Here is what I have done: 1.)
On your Blackberry, go to Options > Advanced Options > TCP
and populate your carriers APN settings. A comprehensive list of carrier APN settings can be found here
*Skipping this step will result in a "PPP Server" error.2.)
Extract the Modem Script from the attached .zip file and place it in the Mac HD > Library > Modem Scripts folder. Be sure you place it in the root Library folder and not the Library folder associated with your User folder. Do not launch or open the file, this is unnecessary. BlackBerry 3G CID1.zip 3.)
Pair your phone with the Mac. Be sure you have set it up as a Trusted Connection and is set to "Yes" and not "Ask". 4.)
In Bluetooth Preferences, select your phone in the list, and then click "Configure this device". This will launch the Bluetooth Setup Assistant. 5.)
Check the "Access Internet..." and proceed. 6.)
Select "Other" for Vendor, and "Blackberry 3G CID1" (name of the modem script) for Phone Model. Leave the Username, Password, and Phone Number blank. Continue. 7.)
Launch Network Preferences, and click "Bluetooth" in the list. 8.)
Select "Add Configuration" from the Configuration drop list. Name the configuration something you can identify. I use my carrier name (AT&T). 9.)
Populate the remaining fields with your APN information, using the wap server URL as the Telephone Number.
Example for AT&T :
A comprehensive list of carrier APN settings can be found here.10.)
Check "Show modem status in menu bar" 11.)
Click Advanced, and verify the information is correct.
- Vendor = Other
- Model = Blackberry 3G CID1
- Enable Error... = checked
- Dial Mode = Wait for dial tone before dialing
- Dialing = Tone
- Sound = On
- -All Blank- (NetBIOS may be populated and disabled)
- Configure Proxies = Using a PAC file
- Settings = Session
- Third, Fourth, Fifth and Seventh items checked. Redial 1 Time, and Wait 5 Seconds before redialing
That's it. You are ready to tether.
Enable Bluetooth on your phone, and then on the Mac. Click the modem icon from the menu bar, and select Connect Bluetooth. After a few seconds you should see a connection timer. Disclaimer: Tethering on a mobile device while there is not a tethering plan associated with your account may result in charges being imposed by your carrier. While many people have tethered for years without a tethering plan, and have not been 'caught', many people have had charges levied after only a few hours of use. I am in no way responsible for the actions of, or the charges levied by, carriers as a result of following the instructions posted above. Please proceed with caution.