When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1 x2.2KWAir-cooledspindle motor(ER20, 220V,400Hz,24000rpm,4 bearings)
1 x2.2KW VFDInverter 3HP220V input with 220V output
1 x80mmclampcast aluminiumbracket
1. 2.2KW ER20 Air-cooled Spindle motor Engraving milling Grind
Specification:
Material:Stainless Steel
Size:80x230mm(Middle body diameter:80mm x Length:230mm)
Power:2.2Kw
Voltage:220VAC
Current:8.5A
Frequency:0-400Hz
Speed:0-24000rpm
Cooling:Air-cooled
Accuracy:0.003--0.005
Runout off:Less than 0.05mm
Bearing Lubrication:Grease
Collet size:ER20
Bearings:4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Power Interface:Optional GX16 waterproof air plug, there are marked 1234,123 were connected to theinverter powersupply (U, V, W), 4 connectedinverter ground.
Net Weight:5.2kg
Main application:Wood, Aluminum, Stone, metal, glass, PVC,PCB etc industry
1) Structural features
1) High speed electric main bearing all adopt the C-class high-speed angular contact ball bearing, axis sets of loading, Improve spindle in the high-speed rotation supporting stiffness and precision grinding.
2) Before driving, rotation of the shaft by hand.Spindle high speed rotation caused by temperature rise, use of cooling liquid circulating system to eliminate.
2) Instructions for use
1) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.
2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.
3) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water, after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces coolant. First off the workpiece coolant shutdown, and then close the spindle motor.
3) Maintenance and Service
1) Motorized spindle by medium frequency power supply rated voltage, frequency should be consistent with electric spindle technology parameters, motorized spindle rotational speed can change the frequency to adjust, also directly proportional voltage change.
2) When the spindle is temporarily not in use, should use compressed air to blow the coolant water,to avoid rusting, plug the hole. Spindle surface should be coated with anti rust oil. The shaft end protecting device, placed in dry place.
3) If replacement the spindle of bearings, best professional and technical personnel from the replacement. Use special tools, stator coil does not to be removed.
2. 2.2kw Inverter VFD 220V
This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently.
Genuine Brand Huanyang inverterhave more than 180 piece technical parameter;but cheap copy inverteronly have 34 piece technical parameter;Technical Paramer
1.Inpute voltage:220V±15%(we also stock 110V and 380V+/-15%,please contact us for item stock)
2.Output voltage:220VAC±15%(analogous to input voltage)
3.Input Frequency:48-63HZ
4.Outpute Frequency:0-400HZ
5.Inpute phase:1 phase or 3 phase
6.Outpute phase:3phase
7.warranty:1 year
(we also stock 4KW 7A,2.2KW 10A 220-250V, 3KW 220-250Vand 380V modol,please contact us for stock )
Basic Connection Diagram
Specification
Series
HY inverters
Control Mode
SPWM
Input Power
380V class:380V(+/-15%); 220V class:220V(+/-15%)
5-Digits Display & Status Indicator Lamp
Displaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc.
Communication Control
RS-485
Working Temperature
-10~40 Celsius Degrees
Humidity
0-95% Relative Humidity(without dew)
Vibration
Below 0.5G
Frequency Control
Range
0.1~2500.0Hz
Accuracy
Digital: 0.1%(-10~40 Celsius Degrees); Analog: 0.1% (15Celsius Degrees---45Celsius Degrees)
Setting Resolution
Digital: 0.1Hz; Analog:0.1% of max. Operating frequency
Output Resolution
0.1Hz
Operator Setting Method
Press directlykeys to set.
Analog Setting Method
External Voltage 0-5V,0-10V,4-20mA,0-20mA.
Other Functions
Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
General Control
Ramp Control
Selectable 4-speed steps ramp-up and -down time (0.1-6500s).
V/FCurve
Set V/F curve at will.
Torque Control
Torque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz.
Multi-Inputs
6 multi-function input terminals for 8speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions.
Multi-Outputs
5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings.
Other Functions
Auto Voltage Regulation(AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control,Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
Protection Functions
Overload Protection
Electronic relay protection motor drive
Drive(for constant torque 150% permin. for the kinds of fan 120% per min.)
FuseProtection
When the fuse breaks, the motor will stop.
Over-voltage
220V class:DC Voltage >400V
380V class:DC Voltage >800V
Under-voltage
220V class:DC Voltage <200V
380V class:DC Voltage <400V
Restart After Instant Stop
Restart with Frequency Track after Instant Stop
Stall Protection
Stall protection in ramp operation
Output Short Circuit
Electrical circuit protection
Other Functions
Fin over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, etc.
Easy PLC functioncan realize 16 legs of speed and inverter control function;
RS485 communication port,adoptingstandard international MODBUSmain circuit control;
With extremely stronganti-jamming capability
Low output ratting torque0.5HZ-150%,low speed running ability;
Carrier adjustable by 16KHZ,completely soundless working environment;
Broad voltageworking area
Auto voltage regulation(AVR) technique, for ensuring the inverter load capability;
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
With perfecterror protectionandshort circuit starting protectioncapability;
PASSISO9001 quality certificationwhich means this item is the top quanlity item
3.80mm cast aluminiumbracket
Shipping
USA post serviceround10-18 business days
Canada China postround 25-40 business days
AustraliaChina postround 20-35 business days
Western EU(Germany,UK,France, etc) China post 20-35 business days
Asia,South America,other countries Chins postround 15-40 business days
Note:above offer is default delivery way,if you need fast delivery like as DHL/UPS or post service pls inform us to confirm the shipping cost before you offer
Above DHL/UPS offer is without remote fee,if your post code is remote it need extra cost.
Payment
Problem&response
Refund
Contact us
New 2022 AB 22A-D6P0N104 PowerFlex 4 2.2 kW 3 Hp AC Drive 22A-D6P0N104 Sealed US
$627.59
Allen Bradley AB 22D-D6P0N104 PowerFlex 40 2.2kW 3Hp AC Drive Sealed US
$867.00
New 2022 AB 22A-D6P0N104 PowerFlex 4 2.2 kW 3 Hp AC Drive 22A-D6P0N104 US STOCK
$548.47
Popular Forums