1/8NPT 5V Stainless Steel Pressure Transducer Sender Sensor Oil Fuel Air For Sale

1/8NPT 5V Stainless Steel Pressure Transducer Sender Sensor Oil Fuel Air


This item has been shown 146 times.

Buy Now

1/8NPT 5V Stainless Steel Pressure Transducer Sender Sensor Oil Fuel Air :
$15

Similar Items Description

1/8NPT 5V Stainless Steel Pressure Transducer Sender Sensor Oil Fuel Air Gas

Specification:
Condition: Brand New!!
Model Number:B90095
Product Name: Oil Fuel PressureTransducer
Material: Stainless Steel & Rubber
Color: Silver & Black
Voltage: DC 5V
Size: 53mm x 14mm
Cable Length: 312mm
Thread: 1/8"-27 NPT / 1/8" NPT
Pressure: 5psi, 15psi, 30psi,60psi, 100psi,150psi,200psi
(Please totellus.)
Quantity: 1pc

--30 psi
Input: 0-30 psi
Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 15psi outputs 2.5V, 30 psi outputs 4.5V.
Accuracy: within 2% of reading (full scale).
Thread: 1/8"-27 NPT.
Wiring Connector: Water sealed quick disconnect. Mating connector is included.
Wiring: Red for +5V; Black for ground; Blue for signal output.

--100 psi
Input: 0-100 psi
Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
Accuracy: within 2% of reading (full scale).
Thread: 1/8"-27 NPT
Wiring Connector: Water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for +5V; Black for ground; Blue for signal output.

--150 psi
Input: 0-150 psi
Output: 0.5-4.5V linear voltage output. 0 psi outputs 0.5V, 75 psi outputs 2.5V, 150 psi outputs 4.5V
Accuracy: +/-0.5%FS
Thread: 1/8" NPT
Wiring: Red for +5V; Black for ground; Green for signal output
Overload Capacity: 2-4 times of rated pressure
Working Temperature: -40℃~+120℃
Compensation Temperature: 0℃~+80℃
Protection Class: IP67
Pressure Medium: Oil, gas and water which is compatible with 316L stainless steel
Load Resistance: ≤(supply power-6.5V/0.02A)Ω
Long-term Stability: Less than 0.1%FS/year
Temperature Effect on Zero: Typical:0.02%FS/℃; Maximum:0.05%FS/℃
Temperature Effect on Sensitivity: Typical: 0.02%FS/℃; Maximum: 0.05%FS/℃
Shock Resistance: 1000g
Anti-Shock: ≤+/-0.01%FS(X,Y,Z axes, 200Hz/g)
Response Time: ≤1ms
Insulation Resistance: >100mΩ 500VDC
Explosion-proof Class: ExiaTTCT6
Electromagnetism Compatibility: EN50051-1

--200 psi
Input: 0-200 psi
Output: 0.5V~4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, and 200 psi outputs 4.5V
Working Temperature: -40~+125℃
Accuracy: ±1%FS
Thread: 1/8"-27 NPT
Overload Capacity: 2 times of rated pressure
Pressure Medium: Oil, gas and water which is compatible with 316L stainless steel
Load Resistance: ≤(supply power-6.5V/0.02A)Ω
Long-term Stability: ± 0.2%FS/year
Temperature Effect on Zero: Typical: ±0.02%FS/℃; Maximum: ±0.05%FS/℃
Temperature Effect on Sensitivity: Typical: ±0.02%FS/℃; Maximum: ±0.05%FS/℃
Shock Resistance: 100g
Anti-Shock: ≤±0.01%FS(X,Y,Z axes, 200Hz/g)
Response Time: ≤1ms
Insulation Resistance: >100mΩ 500VDC
Explosion-proof Class: ExiaTTCT6
Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC6 1000-4-3
Wiring Connector: Water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for IN+; Black for GND; Green for OUT.

Fitment:
For oil, fuel, diesel, gas, air pressure(Cannot use measuring water pressure)
Can be used in oil tank, gas tank, diesel tank etc.

Features:
-It's an advance pressure transducer than traditional mechanical pressure transducer.
-±2%FS small output error, including nonlinear, hysteresis error and repeatability, full temperature range.
-It has complete surge voltage protection function.
-Light weight and small size, convenient to install and operate.

Package Includes:
1 x Pressure Transducer (With Cable)

Note:
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.


Detail Image #divImageDetail Payment

1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of sale closing.
4.We ship to your or Paypal address. Please make sure your and Paypal address is correct before you pay.

Shipping

1.We ship to your or Paypal address. Please make sure your and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;



Buy Now

Original Carlo Gavazzi Proximity Switch Inductive Ia12dsn08do  #n4650 picture
Original Carlo Gavazzi Proximity Switch Inductive Ia12dsn08do #n4650


Strain Gauge Bending Test Detection Sensor Module Weigh Amplifier Voltage Ouodts picture
Strain Gauge Bending Test Detection Sensor Module Weigh Amplifier Voltage Ouodts


Original Carlo Gavazzi Proximity Switch Inductive Ia30esf10ucm1   #n4650 picture
Original Carlo Gavazzi Proximity Switch Inductive Ia30esf10ucm1 #n4650


New Pepperl+fuchs Proximity Switch Ia6-12gm35-u-v1 Sensor    #n4650 picture
New Pepperl+fuchs Proximity Switch Ia6-12gm35-u-v1 Sensor #n4650


Popular Forums