This item has been shown 43 times.
2672AM Withstand Hi-Pot 5KV 100VA Tester
RK267 series voltage withstand test instruments are for general- purpose HV test operation, It can be widely used for voltage withstand test in electrician’s assistant instrument,rubber-wooden facility,voltage convertor,wires,power meter,motor, power supply plug, cables and all kinds ofelectronic and electric products. As the launch of the national security standard, Voltage withstand instrument has become one of necessary withstand testinstruments to the radio and electronic products manufacturer.
Operating request: Environmental temperature 0~40℃
Read the following items carefully before operating RK267 series
voltage withstand test instrument
1. Use three-hole power supply plug and insure GND connection
2. GND port and power supply GND port should be connected
3. Wear insulation glove, stand on insulation mat
4. Anti-clockwisely rotary switch to the
maximum before turn on test instrument.
5. Before preset all functions, reset instrument
6. Don’t connect test port and test wire when doing test
7. Don’t connect HV output port with shield box or GND wire to
avoid instrument damage.
8. Turn off power when accident take place
9. Examine and repair when Indicator or annunciator is out of
10. Operate carefully to avoid hazard when take the remote test.
11.The instrument must be placed on the worktable of conductive materials
12.The operator can not wear clothes with metal decoration or wear metal accessories
13.When the tester is in the test conditions, the test line, the test probes, output end , and thetest objectsare all with high pressure, do not touch!
Withstand Hi-Pot Tester - RK2672AM
1×Withstand voltage test equipment
1×High voltage test bar
1×Remote control test bar