When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
IF YOU HAVE ANY QUESTIONS OR WISH TO MAKE AN OFFER, PLEASE CALL RICH AT 760-613-9092
ELNIK SYSTEMS MODEL IN-250High Vacuum Furnace used for large Titanium Aircraft parts.
New: 2006
Working Zone:44\"W x 64\"H x 140\" L
152 Cu.Feet in the Working Zone.
Max. Temp.: 1500 deg F.
(1)Front &(1) Rear Door.
Furnace controlled using a PCComputer through an RSView Interface.
* Windows XP ProfessionalOperating System / PC Computer & Printer
*Argon / Nitrogen Purge
* Leak Detector
* Excess Temperature / Door OpenAlarm
* PLC Failure Alarm
* Six PID loops on the PLCcontrol the temperature by regulating temp. in 6 zones.
* Two PID Loops one each forramping and soaking.
* (2) Chillers with Controls
* Dry Pump
* Muffler
* Water Manifold - Return
* Water Manifold - Supply
* Foreline Valve
* Rotary Vane Pump
* 2 Door Sensors
* 7 Thermocouples
* 2 HiVac actuators
* Door Sheet Pack
* Cold Cathode Gauge
* Capacitance Manometer #2
* Capacitance Manometer #1
* N2 Purge
* AR Process
* 2 Door Heating Elements
* 1 Diffusion Pump - 0.7 GAL./MIN@ 60 deg.F Nominal
* (1) 30\" Water CooledBaffle
* (2) Power Transformers
* (1) Leak Detector Port
* (20) Electrical Feedthru\'s
* 30\" HiVac Assembly
* (2) Hot Zone Assemblies
* (2) Chambers
* Automatic Cycle
SPACE REQUIREMENT:19\'10\" L to R
29\" 4\" F to B
13\'8-1/2\" H
Approx. Weight: 40,000 lbs
O Ring Gaskets WHITE FLAT PTFE WASHERS 10x18x1.5 mm 10x20x1.5 mm -145x140x1.5 mm
$25.43
Popular Forums