AT10.1 Industrial Battery Charger Constant Voltage / Float / Rectifier 12-130Vdc For Sale

AT10.1 Industrial Battery Charger Constant Voltage / Float / Rectifier 12-130Vdc


This item has been shown 6 times.

Buy Now

AT10.1 Industrial Battery Charger Constant Voltage / Float / Rectifier 12-130Vdc:
$799



Microprocessor Controlled AT10 Single Phase Commercial/Industrial Battery Charger AT10.1 Industrial Battery Charger - Constant Voltage Charger / Float Charger/ Rectifier System
NOTE: BAE OEM Manufactures the AT10.1 in the USA under several Brand Names for Hindle, Excide, Enersys, & SBS These units are NEW but HAVE COSMETIC DAMAGE - The FEET on the bottom of the units are Dented/bent where they were bolted on the shipping pallet. We put them back in place and all is well.

Programmable 12 Volt, 24 Volt, 48 Volt and 120 Volt DC Power Battery Charger 25-75 AMPS Systems are micro-processor controlled, UL1564 listed and have up to a 30 year design life. Output voltages include 120 volt DC (130 volt DC float), 48 volt DC, 24 volt DC and 12 volt DC

The AT10Battery Chargeris the world’s easiest to operate float battery charger. It has over 20 years of proven reliability and has become the industry’s “gold standard” for all stationary battery charging applications.5 year standard warranty.

Combining the performance and accuracy of a microprocessor with the reliability of SCR power conversion technology makes the BAE AT10 the standard in stationary battery chargers. AT10.1s are easy to install, operate and maintain. The AT10.1 is packed with the most standard features and best warranty in the industry.

WILL NO LONGER ALLOW IS TO LINK TO DOCUMENTATION - (hint) Go to Google and paste in pdf AT10.1 SERiES - BAE Batteries USA The User manual is also available for download

Applications: Applications include switchgear, dc power operated breakers, alarm systems, dc controller power systems, communications and utility substation power.

With its programmable float voltage settings, long deployment life and extensive service network, the BAE AT10.1battery chargers are a proven solution for industrial DC power systems. Chargers approved for sealed lead acid AGM, gell and certain Ni-Cad batteries. This unit comes pre-set for DC 120v Charge (130v float) @ 75 Amps - voltage is adjustable via the front display.
  • Utility & Communications: Power generation, Substations, Microwave relay sites, Switchgear
  • Manufacturing: Emergency DC Power, DC Operated Breakers, Alarm Systems
  • Commercial: Alarm Systems, Uninterrupted Power Systems, DC Control Systems
  • Transportation: Signal Systems, Switchgear, Alarm Systems, Discrete Charging of Industrial Equipment
Standard Features of the AT10 Battery Charger:
  • 5 Year Product Warranty
  • Universal main control board operates in any AT Series charger
  • Alarm assembly with local LEDs and summary relay contact for AC Failure, DC Failure, High Vdc, Low Vdc, Positive(+) and Negative(-) ground fault
  • High DC voltage shutdown
  • Forced load share during parallel operation
  • Float/equalize selector switch with indicating lights
  • Manual equalize timer (0-255 hr.) with indicating lights
  • AC line failure automatic equalize timer (0-255 hr.) with indicating light
  • AC On indicating light
  • 1% Digital LED meter for Vdc, Adc, timer hours and alarm settings
  • AC input and DC output circuit breakers
  • Membrane front panel
  • A redundant analog circuit for LDCV alarm, independent of the microprocessor
  • Redundant control loops for higher reliability
  • Local or remote voltage sense with redundancy to protect against remote sense failure
  • Self-diagnostics
  • Input & output MOV surge suppressors
  • Reverse polarity protection via free wheeling diodes
  • CU-AL I/O compression lugs
  • Switchboard wire, UL VW-1 closure pre-treated using a 5-stage iron phosphate process with baked epoxy powder coating in ANSI 61 gray
Safety and Acceptance:
  • Meets NEMA PE 5-1996, PE 5-1997 (R2003) specification
  • NEMA-1/IP20 type standard enclosure
  • Third party agency approvals UL +

AC Voltage 220Vac, 380 or 416Vac 50/60Hz Input Voltage Tolerance +10%, -12% Input Frequency Tolerance ±5% Efficiency 85-90% typical for 130Vdc at 50-100% load
DC Output

Voltage Ratings 12, 24, 48, or 130Vdc nominal Current Ratings 30, 40, 50, 75 DC AMPS Continuous Rating 110% rated current at maximum equalize voltage at 50ºC Current Limit Adjustment Range 50% to 110% rated output Voltage Regulation +- .25% Electrical Noise 32dBrnc
Shipping Weight 435 LBS Freight shipping available to your home or business

On Mar-09-18 at 12:44:59 PST, seller added the following information:



Buy Now

Hertner 36 Volts Dc Forklift Battery Charger Mod# 3sf12-450 picture
Hertner 36 Volts Dc Forklift Battery Charger Mod# 3sf12-450


Forklift Battery Repair Liquid Solution- 48 Volt Hawker Deka Crown Hyster Cat picture
Forklift Battery Repair Liquid Solution- 48 Volt Hawker Deka Crown Hyster Cat


36v 25a Dual Pro Eagle Performance Battery Charger W/ Sb50  Industrial I3625 picture
36v 25a Dual Pro Eagle Performance Battery Charger W/ Sb50 Industrial I3625


C & D 48 Volt Forklift Battery Charger picture
C & D 48 Volt Forklift Battery Charger


Popular Forums