AMPROBE AC/DC-54NAV TRUE RMS CLAMP ON MULTIMETER 1000V/1000A For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
AMPROBE AC/DC-54NAV TRUE RMS CLAMP ON MULTIMETER 1000V/1000A:
$159.95
AMPROBE AC/DC-54NAV TRUE RMS CLAMP ON MULTIMETER 1000V/1000A
- Hardly used condition
- Includes all leads pictured
- No case (sorry)
- 1000V CAT. III and 600V CAT. IV
- 1000A Clamp On Capacity
- Audible Voltage Alerts
- Easy To Read Backlit Display
- Jaw Spring Still Closes Tightly
From AMPROBE:
Product Features
True-RMS
Voltage up to 1000V AC/DC, AC/DC Current up to 1000A, resistance, frequency, THD (total harmonics distortion) and individual harmonics from 1 to 25, power (kW), power factor
Temperature from -50 °F to 1832 °F (-50 ºC to 1000 ºC)
Low pass filter for variable frequency drives
Phase rotation indication
Non-contact voltage detection
Continuity beeper
Min, max, peak and smart data hold
Automatic flash light when clamp is open
Large display with active backlight and analog bar graph
Auto power off
Maximum jaw opening 1.60 inch (40mm)
Drop proof to 4 feet
CAT IV 600V, CAT III ACDC-54NAV 1000A AC/DC Power Quality Clamp Meter
Test performance such as verifying system efficiency easily and accurately.
Advanced Features for Complete Troubleshooting of Electrical Systems
The ACDC-54NAV NavigatorTM Clamp Meter serves as a first line of defense for electrical system monitoring and troubleshooting. From daily voltage current checks to sophisticated system verification for power and harmonics, this tool can be used to properly diagnose the entire electrical system. By identifying the specific problem, technicians can take action or more easily escalate the issue to specialized teams. The ACDC-54NAV is packed with advanced features to aid troubleshooting including power and power factor, total harmonic distortion and individual harmonics, inrush current, low pass filter and phase sequence. The unique NavigatorTM joy stick control allows quick selection of the numerous measurement features on the large LCD display. Simply highlight the desired measurement feature using the joy stick and press to select. Built for rugged industrial environments, this CAT IV 600V/CAT III 1000V clamp meter also features super bright backlight display, built-in jaw flashlight and an over molded housing to absorb shocks.
Full Range of Advanced Features
The ACDC-54NAV measures AC/DC current up to 1000A, AC/DC voltage to 1,000V, capacitance, resistance, frequency and temperature from -50 °F to 1832 °F (-50 ºC to 1000 ºC). Its bright LCD screen with backlight is perfect for operation in dark environments and direct sunlight. The meter\'s non-contact voltage detector senses AC voltage without making contact with the circuit. Low pass filter enables reading voltage, current and frequency measurements on variable frequency drives (VFDs). Power factor and active power readings provide data on the power usage and efficiency of electrical systems. This meter measures total harmonic distortion (THD) and individual harmonics up to the 25th harmonic. The total harmonic distortion reading (0 to 100%) identifies whether you have a harmonics issue - the higher the THD percentage, the higher the risk of problems. Harmful harmonics cause electrical system malfunctions including overheating, excessive neutral current and electrical equipment failure. By identifying the specific problematic harmonic, technicians can take action or more easily escalate the problem to specialized teams. The rugged ACDC-54NAV has an impact- and wear-resistant molded rubber body that can withstand drops up to 4 feet. An audible continuity function quickly checks for good electrical connection and a diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display for later viewing. The unit automatically turns off after 15 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter\'s batteries need to be replaced. Its jaws can accommodate an electrical conductor up to 1.60 inch(40 mm) in diameter. The ACDC-54NAV is CAT IV 600V and CAT III 1000V rated. It is also UL listed and CE certified.
What is Power Factor?
Power Factor indicates electrical power efficiency from 0 to 1 by measuring real and reactive power. For example, power factor 1 indicates 100% electrical efficiency. A power factor of . 5 indicates only 50% electrical efficiency, meaning 50% of power is lost and power factor correction must be performed. To correct power factor, current and voltage need to be realigned using either capacitors or resolving harmonics issues.
Wide-Range of Applications
The ACDC-54NAV’s full set of features simplify day to day voltage, current, resistance and continuity applications. Troubleshoot motors with the capacitance function for startup and run capacitors, in-rush current analysis, low-pass filter for variable frequency drives (VFDs) and phase rotation to measure three-phase systems. Test performance such as verifying system efficiency and quickly troubleshooting issues to minimize costly downtime by performing load studies and motor testing system checks in performance. Check power quality to quickly determine the efficiency of an electrical system by measuring power factor and working power measurements and test for harmful harmonics while you perform daily system checks. It is the ideal tool for maintenance and installation of transformers and advanced equipment.
Related Items:
Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/parts/relateditems.php on line 72
