DIN Rail Momentary-Switch/Pulse-Signal Control Latching SPDT Relay Module, 24V For Sale

DIN Rail Momentary-Switch/Pulse-Signal Control Latching SPDT Relay Module, 24V
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

DIN Rail Momentary-Switch/Pulse-Signal Control Latching SPDT Relay Module, 24V:
$16.99

    Part Number: MD-D1022AT/24V

    The item no paper instructions, please download the PDF file, and before buying please read the file:

    Features:

    • This item has been assembled, and electrical test passed.

    • Support on board momentary switch, single external momentary switch, double external momentary switches and pulse signal, four control modes.

    • LED indication for relay set and reset action.

    • Omron G5LA-14 10 Amp SPDT power relay.

    • Power off relay state memory, when the power on again, relay switch will revert to its previous state.

    • The control program based on Microchip MCU PIC12F675, this is a flash microcontroller, if you are familiar PIC firmware, you can redesign the program.

    • High quality DIN rail mount carrier, can support width 35mm / 32mm / 15mm rail.

    • Size: 87 x 50 x 42mm (L x W x H)

    Electrical Parameters:

    • Operating voltage: 19 to 30VDC.

    • Operating current: 30mA, at 24VDC.

    • Relay number: Omron G5LA-14 24VDC.

    • Relay switch type: SPDT.

    • Relay switch capacity: 10Amp at 250VAC/24VDC.

    • Pulse mode signal level: High 3~5V, Low 0V.
      Pulse signal must hold time: High level 1mS minimum, Low level 1000mS minimum.
      Pulse rising is valid.

    Terminal block characteristic:

    • Wire range 26-12AWG

    • Mechanical Torque 0.4Nm(3.5Lb-In.)

    • Strip length 7mm

    • Dimensions Pitch 5.0mm(.197\")

    • Screws M2.5

Popular Forums