When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description
DIN Rail Mount 1 Channel 6 Amp SSR (Solid State Relay) Module Board.
This item has been assembled, and electrical test passed.
LED indicator for relay action.
Fairchild MOC3043 Phototriac and ST BTA12-600B triac.
High quality FR-4 fiber glass PCB.
High quality PCB housing/carrier, DIN railmountable - for width 35 / 32 / 15mm rails.
DIN mount case can be taken apart for panel mount use
PCBdimensions:L 47.35mm x W 72.5mm x H 39mm / 1.86\" x 2.85\" x 1.53\"
External dimensions: L 50mm x W 87 x H 61mm /1.97\" x 3.42\" x 2.40\".
Input signal controlterminal:
Action voltage:3 ~ 32 VDC.
Current: 6mA at 5VDC, 8mA at 12VDC, 11mA at 24VDC, 13mA at 32VDC.
Turn off voltage: 0 ~ 0.8 VDC.
In-Out isolation surge voltage: 7500V.
Output terminal:
Load voltage range: 100 to 240 VAC (50/60Hz).
Max. on-state average current: 6 Amp.
Max. on-state current: 12 Amp (< 10 seconds).
Non repetitive surge peak on-state current: 120 Amp (<20mS).
Max. on-state voltage drop: 1.5V.
Max. off-state current: < 2mA / at 220VAC.
Off-state max. allow voltage: 400V.
Isolation: Phototriac.
Zero cross: Yes.
Load type: General purpose.
Terminal block specifications:
Wire range: 24 ~ 12 AWG.
Strip length: 7mm.
Screws - M2.5, steel, Cr3+ Zn plated.
Pin header and Cage - Brass.
This is a very simple module, no paper specifications, any questions please feel free to contact me.
Output Load Wiring Diagram
Power Distribution DIN Rail Terminal Block Kit KN-T10 26-10AWG 30A 600V NEW OHIO
$20.97
Distribution Terminal Block 160A POWER DISTRIBUTION DIN Rail MOUNT 6-250 AWG
$11.97
Power Distribution Terminal Blocks DIN Rail KN-T10GRY 10AWG 30A 600V UL LISTED
$14.97
Popular Forums