DP30V5AL Adjustable Step-Down Voltage Ammeter 32V5A Power Supply Module For Sale
This item has been shown 25 times.
DP30V5AL Adjustable Step-Down Voltage Ammeter 32V5A Power Supply Module:
Input voltage range:6-40.00V
Output voltage range:0V-32.00V
Output power range:0-160W
Output voltage resolution:0.01V
Output current resolution:0.001A
Output Voltage accuracy:± (0.5% + 1 digits)
Output Current accuracy:± (1% + 3 digits)
Ripple Wave (full load 40v to 32V/5A):about 100 mV VPP
Note: On the status of output, the Input must be 1 V higher than the output.
Please strengthen the heat dissipation when working with big current.
Method of operation:
1.Open or close the output: short press ON / OFF key in any state to turn
the output on or off, turn on and off, turn off the output when the bottom
of the digital control "OFF" indication
2.Set the output voltage and current: Short press the SET key, the LED will
start flashing, press "+" or "-" to increase or decrease the output value,
press "SET" key again to switch "0.01V-> 0.1V -> 0.01A-> 0.01A-> 0.1A-> 1A->
Exit adjustment ", in the adjustment process within 6s without any operation
button to automatically exit the adjustment
3.Switch input and output display: In non-output voltage and current setting
state, short press "IN" key or "OUT" key to switch display input voltage and
output voltage. When the input voltage is displayed, the "IN" indicator
lights up and the output voltage is displayed, and the "IN" indicator turns
4.CC, CV Indication: When the module is working in constant voltage or
constant current mode, the CC and CV indicators will light to indicate CC
and CV status.
5.Output current display Zero calibration: Under no load condition, press
SET key to put power on, and output current display zero calibration,
calibration will automatically exit the calibration process, release the SET
6.Set data automatic storage: During the key operation, the LED display
status, output voltage and current setting data, switch output state will
automatically store the memory, the next power-on default work in the stored
1,you can build a high-power universal charger
2,you can build a precision power supply maintenance
- 2.Please allow 0-3mm error
due to manual measurement. pls make sure you do not mind before you offer.
- 3.Due to the difference
between different monitors, the picture may not reflect the actual color of
the item. Thank you!
Agilent / Hp 66103a Dc Power Module 35v / 4,5a
Micronta - 120vac - Regulated 12 Volt Dc Power Supply Tested, Great Shape
S-25a Gould Mg15-8a Dc Power Supply 45-440hz
Gw Instek Gfg-8210 Function Generator