Fluke 87V 87-V Industrial Multimeter - True-RMS AC Voltage USA - NEW For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Fluke 87V 87-V Industrial Multimeter - True-RMS AC Voltage USA - NEW:
$325.99
You are offerding on a brand new never opened Fluke 87V Industrial Multimeter. Feel free to email me with any questions or concerns and good luck offerding. Please read description below.
Description
- Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
- Built-in thermometer allows temperature measurements without a separate thermometer
- Peak Min/Max allows capture of intermittents as fast 250 µS
- Dual display resolution – 6000 or 20,000 counts – lets you see small changes in displayed readings
- CAT III 1000V, CAT IV 600V safety rated
- Designed and built in the U.S.A.
- Lifetime warranty from Fluke class=\"tabs-content prod-tables ul-disc\">
-
- Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
- Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
- Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models
- True RMS AC voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 0.05% DC accuracy
- 6000 counts, 3-3/4 digits
- 4-1/2 digit mode for precise measurements (20,000 counts)
- Measure up to 1000 VAC and DC
- Measure up to 10 A, 20 A for up to 30 seconds
- Built in thermometer lets you carry one less tool (TC probe included)
- Frequency to 200 kHz and % duty cycle
- Resistance, continuity and diode test
- 10,000 µF capacitance range for components and motor caps
- Min/Max-Average recording with Min/Max Alert to capture variations automatically
- Peak capture to record transients as fast as 250 µs
- Relative mode to remove test lead interference from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Touch Hold to capture stable readings avoiding noisy signals
- Large display digits and two-level bright white backlight for increased visibility
- Analog bargraph for fast changing or unstable signals
- Input Alert provides audible warning against wrong use of input jacks
- Improved selectable sleep mode for long battery life
- Access door for fast battery changes without breaking the calibration seal
- \"Classic\" design with new removable holster with built in test lead and probe storage
- Lifetime warranty
Electrical safety
All inputs are updated to the 3rd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V and CAT III, 1000 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.
Correctly measure pulse-width modulated motor drive signals
Until now, there hasn\'t been a multimeter able to accurately measure adjustable speed drives. But the Fluke 87V is designed specifically to handle these complex signals. Think of the potential productivity you\'ll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.
- Unique function for accurate measurements of noisy pulse-width modulated AC voltage. Measures correctly at the ASD and at the motor terminals
- Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
- Measure AC current with an optional current clamp accessory
- Compare reading from the 87V with the display on the ASD
- Special shielding blocks high frequency, high-energy noise generated by large drive id=\"featuresTab\" style=\"display: block;\" class=\"active\">SpecificationsVoltage DCMaximum voltage1000 VAccuracy±(0.05% + 1)Maximum resolution10 µVVoltage ACMaximum voltage1000 VAccuracy±(0.7% + 2) True RMSAC bandwidth20 kHz with low pass filter; 3 db @ 1 kHzMaximum resolution0.1 mVCurrent DCMaximum amps10 A (20 A for 30 seconds maximum)Amps accuracy±(0.2% + 2)Maximum resolution0.01 µACurrent ACMaximum amps10 A (20 A for 30 seconds maximum)Amps accuracy±(1.0% + 2) True RMSMaximum resolution0.1 µAResistanceMaximum resistance50 MΩAccuracy±(0.2% + 1)Maximum resolution0.1 ΩCapacitanceMaximum capacitance9,999 µFaccuracy±(1% + 2)Maximum resolution0.01 nFFrequencyMaximum frequency200 kHzAccuracy±(0.005% + 1)Maximum resolution0.01 HzDuty cycleMaximum duty cycle99.9%Accuracy±(0.2% per khz + 0.1%)Maximum resolution0.1%Temperature measurement–200.0°C – 1090°C
–328.0°F – 1994.0°F
excluding probe80 BK temperature probe–40.0°C – 260°C
–40.0°F – 500°F, 2.2°C or 2% whichever is greaterConductanceMaximum conductance60.00 nSAccuracy±(1.0% + 10)Maximum resolution0.01 nSDiodeRange3 VResolution1 mVAccuracy±(2% + 1)Duty cycle rangeAccuracyWithin ±(0.2% per kHz + 0.1%)Environmental SpecificationsOperating temperature–20°C to + 55°CStorage temperature–40°C to + 60°CHumidity (without condensation)0% – 90% (0°C – 35°C)
0% – 70% (35°C – 55°C)Operating Altitude2000 mSafety SpecificationsOvervoltage categoryEN 61010–1 to 1000 V CAT III, 600V CAT IVAgency approvalsUL, CSA, TÜV, VDE listedMechanical and General SpecificationsSize201 x 98 x 52 mm (with holster)Weight355 g
624 g – with holsterDisplayDigital6000 counts updates 4/sec.
19,999 counts in high–resolution modeAnalog32 segments, updates 40/secFrequency19,999 counts, updates 3/sec at > 10 HzWarrantyLifetimeBattery LifeAlkaline~400 hours typical, without backlightShock1 Meter drop per IEC 61010–1:2001VibrationPer MIL–PRF–28800 for a Class 2 instrument
Related Items:
Fluke 87-V True RMS Multimeter -
$199.99
Fluke FLUKE 87-V Handheld Multimeter
$328.57
Fluke 87-III / 87-3 True RMS Industrial DVM Multimeter Volt Meter
$99.99
