Globe X30219 Planetary Stand Mixer Replacement BOWL LIFT Micro Switch For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Globe X30219 Planetary Stand Mixer Replacement BOWL LIFT Micro Switch :
$28.99
New Appliance Replacement Part
Globe Planetary Stand Mixers
Heavy Duty Snap Action
BOWL LIFT Micro Switch #X30219
Commercial Kitchen Food Service Equipment: Used in Globe Planetary Mixers.
For Use With Mfr. Globe Food Equipment Co: Planetary Stand Mixers For Use With Mfr. Model Numbers SP10, SP20, SP30, SP30E-220-240501, SP30P, SP62P, SP62P-4, SP62PE-380-400503, SP62PE-405-420503, SP80PL, SPC10, SPC20, SPC30, SPC30P
All switches tested for continuity.
Regulatory
WARNING: This product may contain a chemical known in State of California to cause cancer, or birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
A microswitch bowl lift for Globe Part# X30219 is a type of mechanical switch that is used to control the movement of a bowl lift. The switch is designed to be mounted on the underside of the bowl lift and is used to activate the lift when it reaches a certain height. The switch has two contacts, one for activating the lift and one for deactivating it. When the switch is activated, it will cause the bowl lift to move up or down depending on which contact is activated. The microswitch can be adjusted to set different heights for the bowl lift, allowing it to be used in different applications. This type of switch is commonly used in commercial kitchens and other food service establishments where bowls need to be lifted and lowered frequently.- This microswitch is used to detect when the bowl lift of a Globe food mixer is in the raised or lowered position. It does not fix any symptoms, but rather provides an input signal to the mixer\'s control system.
- Switch Installation:
1. Begin by turning off the power to the mixer and unplugging it from the wall outlet.
2. Remove the bowl from the mixer and set aside.
3. Remove the screws that hold the bowl lift in place and carefully remove it from the mixer.
4. Take your new microswitch, bowl lift for Globe Part# X30219, and place it in position on the mixer where you removed the old one.
5. Secure it in place with screws, making sure they are tight but not over-tightened.
6. Connect any wiring that may be necessary to make sure your new microswitch is properly connected to your mixer’s electrical system.
7. Reattach your bowl to th
Related Items:
Globe X30219 Microswitch, Bowl Lift Genuine OEM +
$28.88
Globe X30219 Planetary Stand Mixer Replacement BOWL LIFT Micro Switch
$28.99
X30219 Globe Microswitch, Bowl Lift Genuine OEM GLOX30219
$67.95
