Handheld Oscilloscope 70MHz 2CH 1GSa/s 2M Memory Depth DMM USB IP51 DSO1072E For Sale

Handheld Oscilloscope 70MHz 2CH 1GSa/s 2M Memory Depth DMM USB IP51 DSO1072E


This item has been shown 22 times.

Buy Now

Handheld Oscilloscope 70MHz 2CH 1GSa/s 2M Memory Depth DMM USB IP51 DSO1072E:
$542

Note:

1.Will for PO Box or APO or FPO), delivery time is about 7 days.

2. Will ship viaexpress mail serviceto Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy,UK, Japan, Korea, Thailand, Malaysia, Indonesia, Philippine and Singapore customers.

3. Customers from other countries pls contact us in advance to confirm different shipping charges before you style="border: 0px none; list-style-position: initial; list-style-image: initial; margin: 0px; padding: 0px; font-family: Arial, Helvetica, sans-serif; line-height: 20px;">

  • High Bandwidth 70MHz-200MHz Oscilloscope, 1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
  • 2M Memory Depth.
  • Large 5.6 inch TFT Color LCD Display; High Resolution(640*480); Dual-Window Design --More clear, More Detailed
  • One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
  • Easy-to-use pop-up menu with built-in multi-language help system.
  • 32 Automatic Measurements.
  • Waveform Math: Add, Subtract, Multiply, and Divide.
  • Store and recall over.
  • Automatic cursor tracking measurements.
  • XY Mode.
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
  • Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
  • Pass/Fail function compares a stored waveform to an unknown input.
  • Average Mode for smoothing waveforms.
  • Square Wave Output (2V, 1kHz) for probe adjustment.
  • USB Host/Device 2.0 full-speed interface; support removeable disk; LAN Option, easy to control by PC or long-distance.
  • Dimensions (mm): 260(L)x220(W)x75(H), be carried ModesReal-Time SampleAcquisition Modes NormalNormal data onlyPeak DetectHigh-frequency and randon glith captureAverageWavefom Average, selectable 4,8,16,32,64,128InputsInputs CouplingAC, DC, GNDInputs Attenuation1X, 10XSupported Probe Attenuation Factor1X, 10X, 100X, 1000XMaximum Input VoltageCAT I and CAT II: 300VRMS (10×), Installation Category;
    CAT III: 150VRMS (1×)
    Horizontal SystemSample Rate Range1GS/sWaveform Interpolation(sin x)/xRecord Length2MSEC/DIV Range4ns/div~2000s/div, in a2, 4, 8 sequence2ns/div~2000s/div, in a2, 4, 8 sequenceSample Rate and
    Delay Time Accuracy±50ppm over any≥1ms time intervalScanning Speed Range4ns/div to 8ns/div; (-8div x s/div) to 40ms;
    20ns/div to 80μs/div;(-8div×s/div) to 40ms
    200μs/div to 40s/div; (-8div×s/div) to 400s2ns/div to10ns/div;
    (-4div×s/div) to 20ms;Delta Time Measurement Accuracy
    (Full Bandwidth)Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns);
    >16 averages:± (1 sample interval + 100ppm × reading + 0.4ns);
    Sample interval = s/div ÷ 200Vertical SystemVertical Resolution8-bit resolution, all channel sampled simultaneouslyVolts Range2mV/div to 100V/div at input BNCBandwidth70MHz100MHz150MHz200MHzRise Time at BNC( typical)5ns3.5ns2.3ns1.8nsAnalog Bandwidth in
    Normal and Average
    modes at BNC or with probe,
    DC -, *, /, FFTFFTWindows:Hanning, Flatop, Rectamgular, Bartlett, Blackman; 1024 sample pointBandwidth Limit20MHzLow Frequency Response (-3db)≤10Hz at BNCDC Gain Accuracy±3% for Normal or Average acquisition mode, 100V/div to 10mV/div.
    ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div.DC Measurement Accuracy,
    Average Acquisition ModeMeasurement Type: Average of≥16 waveforms with vertical position at zero
    Accuracy: ± (3% × reading + 0.1div + 1mV) when 10mV/div or greater is selected.
    Measurement Type: Average of≥16 waveforms with vertical position not at zero
    Accuracy: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div].Volts Measurement Repeatability,
    Average Acquisition ModeDelta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditionsTrigger SystemTrigger TypesEdge, Video, Pulse, Slope, Over time, AlternativeTrigger SourceCH1, CH2, AC LineTrigger ModesAuto, Normal, SingleCoupling TypeDC, AC, HF Reject, LF Reject, Noise RejectTrigger Sensitivity
    (Edge Trigger Type)DC(CH1,CH2):
    1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
    AC: Attenuates signals below 10Hz ;
    HF Reject: Attenuates signals above 80kHz;
    LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz.Trigger Level RangeCH1/CH2: ±8 divisions from center of screen;Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20nsCH1/CH2: 0.2div × volts/div within ±4 divisions from center of screen;Set Level to 50%(typical)Operates with input signals ≥50HzVideo Trigger Video Trigger TypeCH1, CH2: Peak-to-peak amplitude of 2 divisions;Signal Formats and Field RatesSupports NTSC, PAL and SECAM broadcast systems for any field or any lineHoldoff Range100ns ~ 10sPulse Width Trigger Pulse Width Trigger ModeTrigger when (< , >, = , or ≠); Positive pulse or Negative pulsePulse Width Trigger PointEqual: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level.
    Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width.
    Less than: The trigger point is the trailing edge.
    Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse WidthPulse Width Range20ns ~ 10sSlope Trigger Slope Trigger ModeTrigger when (< , > , = , or ≠ ); Positive slope or Negative slopeSlope Trigger PointEqual: The oscilloscope triggers when the waveform slope is equal to the set slope.
    Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope.
    Less than: The oscilloscope triggers when the waveform slope is less than the set slope.
    Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.Time Range20ns ~ 10sOvertime Trigger Over Time ModeeRising edge or Falling edgeTime Range20ns ~ 10sAlternative Trigger Trigger on CH1Internal Trigger: Edge, Pulse Width, Video, SlopeTrigger on CH2Internal Trigger: Edge, Pulse Width, Video, SlopeTrigger Frequency Counter Readout Resolution6 digitsAccuracy (typical)±30ppm (including all frequency reference errors and ±1 count errors)Frequency RangeAC coupled, from 4Hz minimum to rated bandwidthSignal SourcePulse Width or Edge Trigger modes: all available trigger sources
    The Frequency Counter measures trigger source at all times, including when the oscilloscope acquisition pauses due to changes in the run status, or acquisition of a single shot event has completed.
    Pulse Width Trigger mode: The oscilloscope counts pulses of significant magnitude inside the 1s measurement window that qualify as triggerable events, such as narrow pulses in a PWM pulse train if set to < mode and the width is set to a relatively small time.
    Edge Trigger mode: The oscilloscope counts all edges of sufficient magnitude and correct polarity.
    Video Trigger mode: The Frequency Counter does not work.MeasureCursor MeasurementManual: Voltage difference between difference between of△T in Hertz (1/ΔT);
    Tracing: The valtage and time at a waveform point;Auto MeasuermentFrequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS,General SpecificationsDisplay Resolution640 horizontal by 480 vertical pixelsDisplay ContrastAdjustable (16 gears) with the progress barProbe Compensator Output Output Voltage( typical)About 2Vpp into≥1MΩ loadFrequency(typical)1kHzPower Supply Supply VoltageAC Input:100-240VACRMS,0.6A MAX,50Hz~60Hz; DC Output:9V,2APower 32℉to 122℉(0℃to 50℃);
    Nonoperating: -40℉to 159.8℉(-40℃to +71℃)Cooling MethodConvectionHumidity+104℉or below (+40℃or below): ≤90% relative humidity;
    106℉to 122℉(+41℃to 50℃): ≤60% relative humidityAltitudeOperating: Below 3,000m (10,000 feet);
    Nonoperaring: Below 15,000m(50,000 feet)Mechanical Size260mmmm; 220mm; 75mmWeight2.5KG(without Packing)DMM ModesMax. Resolution6000 CountsDMM Testing ModesVoltage, Current, Resistance, Capacitance, Diode & ContinuityMax. Input VoltageAC:600V, DC: 800VMax. Input CurrentAC: 10A, DC:10AInput Voltage60.00mV±1%±1 Voltage60.00mV±1%±3 Current60.00mA±1.5%±1 digit10uA600.0mA±1.5%±1 digit100uA6.000A±2%±3 digit1mA10.00A10mAAC Current60.00mA±1.5%±3 digit10uA600.0mA±1%±1 digit100uA6.000A±1.5%±3 digit1mA10.00A10mAResistance600±1%±3 digit0.1Ω6.000K±1%±1 digit100KΩCapacitance40.00nF±1%±1 the smallest capacitance value that can be measured in 5nFDiode0V~2.0VON-OFF test<10Ω


    Buy Now

    Bk Precision, Dynascan Corporation. 1045. Telephone Product Tester. Price Cut picture
    Bk Precision, Dynascan Corporation. 1045. Telephone Product Tester. Price Cut


    Fluke 97 50mhz Scopemeter Scope Meter picture
    Fluke 97 50mhz Scopemeter Scope Meter


    Tektronix Tds 320 Digital Oscilloscope picture
    Tektronix Tds 320 Digital Oscilloscope


    Tektronix Tds3054 4 Ch Dpo Oscilloscope 500mhz 5gs/s, Ship World Wide. picture
    Tektronix Tds3054 4 Ch Dpo Oscilloscope 500mhz 5gs/s, Ship World Wide.


  • Popular Forums