When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The KMC MEP-5061/5071 3-wire ControlSet Actuators are designed to control small dampers such as air terminal unit dampers or VEP-40 series valves. The MEP-5061 is an 18 minute actuator and the MEP-5071 is a 60 minute actuator. The actuator mounts to a 1/2” or 3/8” diameter damper shaft, eliminating the need for expensive and complicated linkages. When mounting to a 3/8” diameter shaft, the HFO-0011 shaft adaptor is required and must be ordered separately. These offerirectional motors may be controlled via an SPDT floating thermostat or building automation system. A minimum of 50 in-lb of torque over the maximum angular rotation of 95 is provided. Both minimum and maximum end stops are stan?dard to limit the rotation. A gear disengagement feature al lows positioning of the damper and/or gear train without energizing the actuator. An optional response potentiometer and/or a single, double or triple auxiliary switch can be field added. (The MEP-5063/5065/5073 actuators are obsolete. See the MEP-5061/5071 style=\"box-sizing: border-box; margin: 0px 0px 12px; line-height: 1.5;\">
KMC 30-053-097 Replacement Belt
$199.96
KMC 30-053-108 Replacement Belt
$33.94
KMC CONTROLS BAC-7302 / BAC7302 TESTED
$224.00
Popular Forums