LAGUN POWER FEED TOOLS MILL CRANK KNEE LIFT TOOLING AND FOR OTHER MILLS For Sale
This item has been shown 81 times.
LAGUN POWER FEED TOOLS MILL CRANK KNEE LIFT TOOLING AND FOR OTHER MILLS:
This listing is for the Lagun adapter only although it may fit other brands that we are not aware of. We build these for other mills also, see other listings. Here is the latest and greatest in Mill accessories from Rogeo Enterprises. Its the NEW knee lift adapter for the LAGUN Milling machines. Built for the 7 cog spline with a 5/8" (.625") diameter x 1-1/2" (1.500") long shaft.
This NEW design is light weight and very versitil. You can use a 3/8" socket adapter on your hand drill, Ratchet, Ratcheting box wrench, regular box wrench or the open end wrench, all 7/8" (the same wrench as most hold-down nuts).
The adapter is aluminum and hard Anodized for strength and makes it easier to find on the rack. Need to make fine adjustments...No Problem, put the Wrench or Ratchet on the tool and leave it until you are done. Need to make a large move... No Problem, put any power or battery operated drill up to it and move it, its that simple!
TIP: We have found that some of the older machines are harder to move with the battery powered drill. Just put the drill in LOW, that should do the trick.
Order now and get a FREE 3/8" socket driver with each adapter.These are Gold anodized.
We know anyone that has this equipment can build these, But not for this price, and that includes shipping! On top of that, if you don't like it, let us know we will pay to have it shipped back!
Thanks for looking. Feel free to email us with any questions. If you need another model see other listing or let us know. We build them for: Bridgeports, MSC, Comets, Enco, Supermax, Victor, Jet, Alliant, Acer, Sharp, Chevalier, Webb, Shizuoka and others with the 7 OR 9 cog and now "LAGUN". Some of these companies build larger machines, so check to see the shaft size and the number of splines on the cog. If you have a different spline, let us know and we will send you the dimensional check list so we can build you one at the same cost.
Milling Machine Part Elevating Knee Crank Handle For 9teeth Lifting Mill Machine
Tightening Kit, Iso 30 Stand, Er32 And Er40 Torque Wrenches, P/n Ttp-301
Tightening Kit, Hsk 63f And Iso 40 Stand, Er32 Torque Wrench, P/n Ttp-633
Tightening Kit, Hsk 63f And Iso 40 Stand, Er40 Torque Wrench, P/n Ttp-632