MAX31865 PT100 RTD Digital Temperature Thermocouple Sensor Amplifier For Arduino For Sale

MAX31865 PT100 RTD Digital Temperature Thermocouple Sensor Amplifier For Arduino
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

MAX31865 PT100 RTD Digital Temperature Thermocouple Sensor Amplifier For Arduino:
$13.30

MAX31865 PT100 RTD Digital Temperature Thermocouple Sensor Amplifier For Arduino

Description:
Item 1

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0°C, thus the name PT100. Compared to most NTC/PTC thermistors, the PT type of RTD is much most stable and precise (but also more expensive) PT100's have been used for many years to measure temperature in laboratory and industrial processes, and have developed a reputation for accuracy (better than thermocouples), repeatability, and stability.
However, to get that precision and accuracy out of your PT100 RTD you must use an amplifier that is designed to read the low resistance. Better yet, have an amplifier that can automatically adjust and compensate for the resistance of the connecting wires. If you're looking for a great RTD sensor, today is your lucky day because we have a lovely Ours RTD Sensor Amplifier with the MAX31865 breakout for use with any 2, 3 or 4 wire PT100 RTD!
We've carried various MAXIM thermocouple amplifiers and they're great - but thermocouples don't have the best accuracy or precision, for when the readings must be as good as can be. The MAX31865 handles all of your RTD needs, and can even compensate 3 or 4 wire RTDs for better accuracy. Connect to it with any microcontroller over SPI and read out the resistance ratio from the internal ADC. We put a 430Ω 0.1% resistor as a reference resistor on the breakout. We have some example code that will calculate the temperature based on the resistance for you.
We even made the breakout 5V compliant, with a 3.3V regulator and level shifting, so you can use it with any Arduino or microcontroller.
Each order comes with one assembled RTD amplifier breakout board. Also comes with two 2-pin terminal blocks (for connecting to the RTD sensor) and pin header (to plug into any breadboard or perfboard). A required PT100 RTD is not included! (But we stock them in the shop). Some soldering is required to solder the headers and terminal blocks to the breakout, but it's an easy task with soldering tools.
Please note: this does not include an RTD sensor!
Package Included:
1PC*MAX31865 PT100 RTD Digital Converter Temperature Thermocouple Sensor Amplifier

Item 2

We've carried various MAXIM thermocouple amplifiers and they're great - but thermocouples don't have the best accuracy or precision, for when the readings must be as good as can be. The MAX31865 handles all of your RTD needs, and can even compensate 3 or 4 wire RTDs for better accuracy. Connect to it with any microcontroller over SPI and read out the resistance ratio from the internal ADC. We put a 430Ω 0.1% resistor as a reference resistor on the breakout. We have some example code that will calculate the temperature based on the resistance for you.
We even made the breakout 5V compliant, with a 3.3V regulator and level shifting, so you can use it with any Arduino or microcontroller.
MAX31865 in the device integrates a PT resistor excitation source, AD converter, using the SPI interface communication, the design of the circuit is very simple, only need a reference resistor, two power filter capacitor, and then connect to the PT resistance temperature measurement can be achieved.
Feature:
1.RTD resistance directly into digital output
2.Suitable for PT100 resistance
3.PT resistance connection support 2 wire, three wire and four wire system
4.Maximum conversion time: 21ms
5.Internal ADC resolution: 15 bit
6.The accuracy of the whole temperature range is 0.5
7.With + 50V input protection
8.Various fault detection of PT resistance
9.Maximum operating current not exceeding 3.5mA
Please note: this does not include an RTD sensor! this Module is for PT100 RTD
Package Included:
1PC*PT100 MAX31865 RTD Temperature Thermocouple Sensor Amplifier Module For Arduino

    * If a problem occurs, contact us immediately with any email request.

    * Just contact us using the " Ask the seller a question" link on .

    Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.

    Contact us

    For anything problem about product, price, shipping or order status, pleasecontact us via message.Just contact us using the " Ask the seller a question" link on .
    We expect positive response and 5 scores DSR from you.

    Return Policy
    1. We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
    2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
    3. Please include your ID and item number with any email requests.



    Buy Now

    Related Items:

    MAX31865 High Precision Isolated Temperature Collector Module PT100 Port Output picture

    MAX31865 High Precision Isolated Temperature Collector Module PT100 Port Output

    $21.59



    MAX31865 PT100 RTD High Precision Temperature Controller Digital Thermostat picture

    MAX31865 PT100 RTD High Precision Temperature Controller Digital Thermostat

    $13.35



    MAX31865 High Precision Isolated Temperature Collector Module PT100 Serial Port. picture

    MAX31865 High Precision Isolated Temperature Collector Module PT100 Serial Port.

    $21.59



Popular Forums