This item has been shown 116 times.
New AC 100A Digital LED Panel Meter Power Monitor Power Energy Voltmeter AmmeterDetail
2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
3. Power alarm threshold preset function (can set power alarm threshold).
4. The reset function of energy key.
5. Store data when power off.
6. Large-screen LCD (display voltage, current, active power, energy at the same time)
7. Backlight function.
ROMAN I. Display Interface
Display interface is large-screen LCD, it can display voltage, current, power, energy parameters at the same time, as shown in figure 1
Figure 1 LCD display interface
ROMAN II. Display format
within 1KW, the display format is 0.0~999.9W;
1KW and above, the display format is 1000~4500W.
Within 10KWh, the display format is 0~9999Wh;
10kWh and above, the display format is 10~9999kWh.
Display format: 80~260V
Display format: 0.00~100A
ROMAN III. Key
Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
2. Reset energy
Step1: Long press the key for 5 seconds until the number in energy display window flash, then release the key.
Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. If you don’t want to clear, then long press the key for 5 seconds until the number doesn’t flash, it means the energy value is not cleared and will exit the reset state.
3.Set power alarm threshold
Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state
Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0～4.5kW
1. This module is suitable for indoor, please do not use outdoor.
2. Applied load should not exceed the rated power.
3. Wiring order can’t be wrong.
F. Specification parameters
1. Working voltage: 80 ~ 260VAC
2. Test voltage: 80 ~ 260VAC
3. Rated power: 100A/4500W
4. Operating frequency: 45-65Hz
5. Measurement accuracy: 1.0 gradePacking including:
Your order will be shipped within 1 business days,once we receive your payment.Item Location
Walton, KY, 41094,USPayment Mathord
PayPal payment accepted only.Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 30 days of delivery date and item must be in original new condition.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive response, and will do the same in return. DO NOT leave negative response without first communication with us. Please allow max 2 business days for us to response.thanks.