Promo iCP12 (5mV)- 6 Ch. PC Analog USB Oscilloscope Unlimited Logger IO DAQ ADC For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Promo iCP12 (5mV)- 6 Ch. PC Analog USB Oscilloscope Unlimited Logger IO DAQ ADC:
$13.84
usbStickis a mini size 28 Pin USB PIC18F2550 IO Board with 13x input, output, analog and pwm pins.
Great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/Samples period.
The features of iCP12 are listed as followings:
- Mini size, easy interfacing, high performance and user friendly device
- Used withPIC18F255028-PinFlash USB PIC MCU
- Excellent flexibility that allows user to expand the board with plug and play modules
Similar Product Links:
- iCP12 usbStick:piccircuit, (1mV), (5mV),
- Shipping from US (Amazon FBA):1mV,5mV
- Shipping from UK (Amazon FBA):1mV,5mV
- iCP12B usbStick withhigher accuracy(4.096V Shunt Voltage Reference) &Micro USBConnector:piccircuit,
- iCP12A DaqDuino (Arduino Form):piccircuit,
- iCP12A Sub-G DaqDuino (Wireless/USB Mode):piccircuit,
- 1.5M USB 2.0 Cable (A-Male to A-Female):piccircuit
- iCP01- USB Microchip PIC Programmer (5.0V):piccircuit,
- iCP02- USB Microchip PIC Programmer (3.3V/5.0V & EEPROM):piccircuit,
- ValuePack1- (2+1 FREE) 3 pieces of iCP12 (5mV) usbStick:
- ValuePack2- (3+2 FREE) 5 pieces of iCP12 (5mV) usbStick:
- ValuePack3- (2+1 FREE) 3 pieces of iCP12 (1mV) usbStick:
- ValuePack4- (3+2 FREE) 5 pieces of iCP12 (1mV) usbStick:
iCP12 usbStickPeripheral Features:
- 13x IO Port (6x 10bit ADC pins, 2x 10 bit PWM/Freq/DAC pins)
- 12bit/1mV ADC Resolutionis available at following:Link
- Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps)
- Supported operating systems (32bit/64bit): Windows XP ,Windows Vista, Windows 7, Windows 8, Windows 10, Linux,Mac OS XandRaspberry Pi
- Maximum Voltage: 5Vdc
- 100mA current output at VDD pin with over-current protection
- 20MHz oscillator
- Green LED - power on indicator
- 2x LEDs (Green, Red) - status indicator
- ICSP Connector - on-board PIC programming
- Switch Mode Selection - Boot or Normal mode
Applications(We welcome your response):
- Space Technologies:ReGS
- Automotive
- Industry
SmartDAQ v1.4 Software Features:
- Supported operating systems (32bit/64bit):Windows OS
- Sampling channel:6x Analogs(10 bits ADC) +7x Digitals(Input/Output)
- Maximum Sampling rate:1KHzor1mSec/Samples
- Sampling voltage:0V - 5V(scalable graph) at5mVResolution
- Sampling period:
- mSec:1, 2, 5, 10, 20, 50, 100, 200, 500
- Sec: 1, 2, 5, 10, 20, 30
- Min:1, 2, 5, 10, 20, 30, 60
- Trigger Mode: Larger[>], Smaller[<], Positive edge[↑], Negative edge[↓]
- Sampling Mode:Continuous,Single
- Logging Function:
- Save Format:Text,Graphic,Both
- Start Time: Normal, Once Trigger, 24-Hour Clock (Auto Run)
- End Time: Unlimited, Data Size, 24-Hour Clock (Auto Stop)
- Recorded Data style=\"font-size: 14pt; font-style: inherit; font-weight: inherit; padding: 0px 0px 0px 0pt; margin: 0.5em 0pt; border: 0px; outline: 0px; vertical-align: baseline;\">
Dimension:
- Dimension: 7.0cm X 2.3cm X 0.5cm (H)
- Standard 1x5 2.54mm Pin Socket for ICSP connection
- Standard 4x6 2.54mm Pin Socket for IO Port connection
Remarks:
- Overvoltage or overcurrent may damage the MCU.Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Layout:
Accessories List:(These accessories would be shipped together)
- 28 Pin PIC:PIC18F2550
- Preloaded Firmware:HID Bootloader+iCP12 DAQv1.4 Firmware
- iCP12 firmware can be updated usingMicrochip USB HID Bootloadervia USB port
- NO programmer is required!
Firmware Upgrade:
- First, switch the SW1 to \'A\' for bootloader mode and connect it to USB port
- Then program the iCP12 with provided firmware (iCP12_xx_Firmware.hex) file
- Disconnect the iCP12 and switch back the SW1 to \'B\' for normal operation
Photos:
- 3.0V battery measurement withiCP12 [PIC18F2553] &Vref Off/OnComparison[improve the signal accuracy]
- All6x ADC signalsoverlap together into a single line:x1,x2,x5,x10(Zoom Scale)
- ParallelRecording in\'Text & Graphic Form\'at1mSecSample Rate (0.5 sec/graph)
Video:
- SmartDAQDemo:(withiCP12 usbStick&iCM32 XYZ Axis Accelerometer)Video
SmartDAQ with iCP12 usbStick & iCM32 XYZ Axis Accelerometer - YouTube
Video will open in a new window
Download:
- Please share it for more great features:
Related Items:
Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/parts/relateditems.php on line 72