When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Product introduction:
1:This is a digital plasma cutting machine with perfect function, high performance and advanced
technology. CUT65 is an ultra-portable plasma cutting system suitable for a variety of application
requirements. It can be used in handheld cutting and robot cutting as well. CUT65 can cut
conductive metal, such as low carbon steel, stainless steel and aluminum. The cutting thickness
can reach up to 20mm and perforating thickness can reach up to 15 mm.
2:This machine is economic and practical since it can cut metals by adopting compressed air as
the plasma gas source. The cutting speed has increased by 1.8 times when compared with
oxyacetylene cutting. It can cut thick steel plates such as stainless steel, copper, cast iron and
aluminum conveniently and quickly. It is easy to ignite arc by adopting HF arc ignition mode,
and post-flow function is available. With simple operation and high cutting speed, smooth cutting
surface can be obtained, and polishing is unnecessary.
PFC Technology
Power factor more than 0.99.Multiple advantages such as energy saving and wider input voltage,
Wide Input Voltage
96VAC~300VAC.
plasma cutting arc:
There are two cutting arc operation function,
Pilot Arc cutting and Contact arc cutting
Increases cutting capabilities and speed.Extends tip’s life.Ideal for grid cutting.
Protections
Various protective and alarm functions for over-temperature and over-current.
works with 110V and 220V.
Generator friendlyDesigned to work with diesel generators and to avoid failures due to its voltage spikes.DATA:Input voltages
(± 10%)
CSA
200 – 240 V, 1-PH, 50-60 Hz
OR
96 -132V, 1-PH, 50-60 Hz1
CE/CCC
230 V, 1-PH, 50-60 Hz
OR
120 V, 1-PH, 50-60 Hz
Input current
@ 6.5 kW
CSA
200 - 240 V, 1-PH, 39/32 A
OR
96-132 V, 1-PH, 48/42 A1
CE/CCC
230 V, 1-PH, 33 A
OR
120 V, 1-PH, 45 A
Output current
20–50 A
Rated output voltage
132 VDC
Duty cycle
@ 40° C (104° F)
CSA
60%@ 50A,200-240V,1-PH
100%@ 45A,200-240V,1-PH
60%@ 35A,96-132V,1-PH
100%@ 30A,96-132V,1-PH
CE/CCC
60%@ 50A,230V,1-PH
100%@ 45A,230V,1-PH
60%@ 35A,120V,1-PH
100%@ 30A,120V,1-PH
Open circuit voltage (OCV)
275 VDC
Dimensions with handles
426 mm (17.4\") D; 172 mm W; 348 mm H
Weight with 6.1 m (20\') torch
CSA
9.1 kg
CE/CCC
9.1kg
Gas supply
Cutting: air (clean, dry and oil-free), nitrogen, F5
Gouging: air (clean, dry and oil-free), nitrogen, F5
Marking: air (clean dry and oil-free) argon
Recommended
gas inlet
flow rate / pressure
188 I/min (400 scfh) @ 5,9 bar (90 psi)
Input power cable length
3 m (10\')
Power supply type
Inverter – IGBT
Engine drive requirement
12.5 kVA (10 kW) for full 45 A output
Electrical efficiency
85%
Recyclability
100%
Warranty
Power supply: 1-year
Accessories:
This machine, we provide:
· 1 x Ground clamp 1.8-meter cable
· 1 x Plasma Cutting Torch (LOW FREQUENCY Trafimet S45 TORCH) with 6-meter cable
· 5x Electrodes
· 5 x Tips
· 5 x Ceramic Shield Cups
· 1 x Regulator
· 1xManual
Popular Forums