Warning: Cannot modify header information - headers already sent by (output started at /home/epn/detail.php:147) in /home/epn/detail.php on line 261
Siemens S7-1500 Analog Input PLC Module AI 8 6ES7531-7KF00-0AB0 for Sale - BlackBerryForums.com

Siemens S7-1500 Analog Input PLC Module AI 8 6ES7531-7KF00-0AB0 For Sale

Siemens S7-1500 Analog Input PLC Module AI 8 6ES7531-7KF00-0AB0
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Siemens S7-1500 Analog Input PLC Module AI 8 6ES7531-7KF00-0AB0:
$299.99

6ES7531-7KF00-0AB0S7-1500, AI 8XU/I/RTD/TC ST
Mint Condition, 100% Functional.
SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC ST, 16 BITS OF RESOLUTION, ACCURACY 0.3 %; 8 CHANNELS IN GROUPS OF 8; 4 CHANNNELS FOR RTD MEASURING, COMMON MODE VOLTAGE APPR. 10 V; DIAGNOSIS, PROCESSALARMS INCL. INFEED ELEMENT, SHIELD CLAMP AND SHIELD TERMINAL
General informationProduct type designationAI 8xU/I/RTD/TC STHW functional statusFS01Firmware versionV2.0.0● FW update possibleYesProduct function● I&M dataYes; I&M0 to I&M3● Measuring range scalableNo● Scalable measured valuesNo● Adjustment of measuring rangeNoEngineering with● STEP 7 TIA Portal configurable/integrated as of versionV12 / V12● STEP 7 configurable/integrated as of versionV5.5 SP3 / -● PROFIBUS as of GSD version/GSD revisionV1.0 / V5.1● PROFINET as of GSD version/GSD revisionV2.3 / -Operating mode● OversamplingNo● MSIYesCiR – Configuration in RUNReparameterization possible in RUNYesCalibration possible in RUNYesSupply voltageRated value (DC)24Vpermissible range, lower limit (DC)20.4Vpermissible range, upper limit (DC)28.8VReverse polarity protectionYesInput currentCurrent consumption, max.240mA; with 24 V DC supplyEncoder supply24 V encoder supply● Short-circuit protectionYes● Output current, max.20mA; Max. 47 mA per channel for a duration < 10 sPowerPower available from the backplane bus0.7WPower lossPower loss, typ.2.7WAnalog inputsNumber of analog inputs8● For current measurement8● For voltage measurement8● For resistance/resistance thermometer measurement4● For thermocouple measurement8permissible input voltage for voltage input (destruction limit), max.28.8Vpermissible input current for current input (destruction limit), max.40mATechnical unit for temperature measurement adjustableYes; °C/°F/KInput ranges (rated values), voltages● 0 to +5 VNo● 0 to +10 VNo● 1 V to 5 VYes● Input resistance (1 V to 5 V)100kΩ● -1 V to +1 VYes● Input resistance (-1 V to +1 V)10MΩ● -10 V to +10 VYes● Input resistance (-10 V to +10 V)100kΩ● -2.5 V to +2.5 VYes● Input resistance (-2.5 V to +2.5 V)10MΩ● -25 mV to +25 mVNo● -250 mV to +250 mVYes● Input resistance (-250 mV to +250 mV)10MΩ● -5 V to +5 VYes● Input resistance (-5 V to +5 V)100kΩ● -50 mV to +50 mVYes● Input resistance (-50 mV to +50 mV)10MΩ● -500 mV to +500 mVYes● Input resistance (-500 mV to +500 mV)10MΩ● -80 mV to +80 mVYes● Input resistance (-80 mV to +80 mV)10MΩInput ranges (rated values), currents● 0 to 20 mAYes● Input resistance (0 to 20 mA)25Ω; Plus approx. 42 ohms for overvoltage protection by PTC● -20 mA to +20 mAYes● Input resistance (-20 mA to +20 mA)25Ω; Plus approx. 42 ohms for overvoltage protection by PTC● 4 mA to 20 mAYes● Input resistance (4 mA to 20 mA)25Ω; Plus approx. 42 ohms for overvoltage protection by PTCInput ranges (rated values), thermocouples● Type BYes● Input resistance (Type B)10MΩ● Type CNo● Type EYes● Input resistance (Type E)10MΩ● Type JYes● Input resistance (type J)10MΩ● Type KYes● Input resistance (Type K)10MΩ● Type LNo● Type NYes● Input resistance (Type N)10MΩ● Type RYes● Input resistance (Type R)10MΩ● Type SYes● Input resistance (Type S)10MΩ● Type TYes● Input resistance (Type T)10MΩ● Type TXK/TXK(L) to GOSTNoInput ranges (rated values), resistance thermometer● Cu 10No● Cu 10 according to GOSTNo● Cu 50No● Cu 50 according to GOSTNo● Cu 100No● Cu 100 according to GOSTNo● Ni 10No● Ni 10 according to GOSTNo● Ni 100Yes; Standard/climate● Input resistance (Ni 100)10MΩ● Ni 100 according to GOSTNo● Ni 1000Yes; Standard/climate● Input resistance (Ni 1000)10MΩ● Ni 1000 according to GOSTNo● LG-Ni 1000Yes; Standard/climate● Input resistance (LG-Ni 1000)10MΩ● Ni 120No● Ni 120 according to GOSTNo● Ni 200 according to GOSTNo● Ni 500No● Ni 500 according to GOSTNo● Pt 10No● Pt 10 according to GOSTNo● Pt 50No● Pt 50 according to GOSTNo● Pt 100Yes; Standard/climate● Input resistance (Pt 100)10MΩ● Pt 100 according to GOSTNo● Pt 1000Yes; Standard/climate● Input resistance (Pt 1000)10MΩ● Pt 1000 according to GOSTNo● Pt 200Yes; Standard/climate● Input resistance (Pt 200)10MΩ● Pt 200 according to GOSTNo● Pt 500Yes; Standard/climate● Input resistance (Pt 500)10MΩ● Pt 500 according to GOSTNoInput ranges (rated values), resistors● 0 to 150 ohmsYes● Input resistance (0 to 150 ohms)10MΩ● 0 to 300 ohmsYes● Input resistance (0 to 300 ohms)10MΩ● 0 to 600 ohmsYes● Input resistance (0 to 600 ohms)10MΩ● 0 to 3000 ohmsNo● 0 to 6000 ohmsYes● Input resistance (0 to 6000 ohms)10MΩ● PTCYes● Input resistance (PTC)10MΩThermocouple (TC)Temperature compensation— parameterizableYes— internal temperature compensationYes— external temperature compensation via RTDYes— Compensation for 0 °C reference point temperatureYes; fixed value can be set— Reference channel of the moduleYesCable length● shielded, max.800m; for U/I, 200 m for R/RTD, 50 m for TCAnalog value generation for the inputsIntegration and conversion time/resolution per channel● Resolution with overrange (bit including sign), max.16bit● Integration time, parameterizableYes● Integration time (ms)2,5 / 16,67 / 20 / 100 ms● Basic conversion time, including integration time (ms)9 / 23 / 27 / 107 ms— additional conversion time for wire-break monitoring9 ms (to be considered in R/RTD/TC measurement)— additional conversion time for resistance measurement150 ohm, 300 ohm, 600 ohm, Pt100, Pt200, Ni100: 2 ms, 6000 ohm, Pt500, Pt1000, Ni1000, LG-Ni1000, PTC: 4 ms● Interference voltage suppression for interference frequency f1 in Hz400 / 60 / 50 / 10 Hz● Time for offset calibration (per module)Basic conversion time of the slowest channelSmoothing of measured values● parameterizableYes● Step: NoneYes● Step: lowYes● Step: MediumYes● Step: HighYesEncoderConnection of signal encoders● for voltage measurementYes● for current measurement as 2-wire transducerYes— Burden of 2-wire transmitter, max.820Ω● for current measurement as 4-wire transducerYes● for resistance measurement with two-wire connectionYes; Only for PTC● for resistance measurement with three-wire connectionYes; All measuring ranges except PTC; internal compensation of the cable resistances● for resistance measurement with four-wire connectionYes; All measuring ranges except PTCErrors/accuraciesLinearity error (relative to input range), (+/-)0.02%Temperature error (relative to input range), (+/-)0.005%/K; with TC type T 0.02 +/- %/KCrosstalk between the inputs, max.-80dBRepeat accuracy in steady state at 25 °C (relative to input range), (+/-)0.02%Temperature error of internal compensation+/-6 °COperational error limit in overall temperature range● Voltage, relative to input range, (+/-)0.3%● Current, relative to input range, (+/-)0.3%● Resistance, relative to input range, (+/-)0.3%● Resistance thermometer, relative to input range, (+/-)Ptxxx standard: ±1.5 K, Ptxxx climate: ±0.5 K, Nixxx standard: ±0.5 K, Nixxx climate: ±0.3 K● Thermocouple, relative to input range, (+/-)Type B: > 600 °C ±4.6 K, type E: > -200 °C ±1.5 K, type J: > -210 °C ±1.9 K, type K: > -200 °C ±2.4 K, type N: > -200 °C ±2.9 K, type R: > 0 °C ±4.7 K, type S: > 0 °C ±4.6 K, type T: > -200 °C ±2.4 KBasic error limit (operational limit at 25 °C)● Voltage, relative to input range, (+/-)0.1%● Current, relative to input range, (+/-)0.1%● Resistance, relative to input range, (+/-)0.1%● Resistance thermometer, relative to input range, (+/-)Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K● Thermocouple, relative to input range, (+/-)Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.8 KInterference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency● Series mode interference (peak value of interference < rated value of input range), min.40dB● Common mode voltage, max.10V● Common mode interference, min.60dBIsochronous modeIsochronous operation (application synchronized up to informationDiagnostics functionYesAlarms● Diagnostic alarmYes● Limit value alarmYes; two upper and two lower limit values in each caseDiagnostic messages● Monitoring the supply voltageYes● Wire-breakYes; Only for 1 to 5 V, 4 to 20 mA, TC, R, and RTD● Overflow/underflowYesDiagnostics indication LED● RUN LEDYes; Green LED● ERROR LEDYes; Red LED● Monitoring of the supply voltage (PWR-LED)Yes; Green LED● Channel status displayYes; Green LED● for channel diagnosticsYes; Red LED● for module diagnosticsYes; Red LEDPotential separationPotential separation channels● between the channelsNo● between the channels, in groups of8● between the channels and backplane busYes● between the channels and the power supply of the electronicsYesPermissible potential differencebetween the inputs (UCM)20 V DCBetween the inputs and MANA (UCM)10 V DCIsolationIsolation tested with707 V DC (type test)Ambient conditionsAmbient temperature during operation● horizontal installation, min.0°C● horizontal installation, max.60°C● vertical installation, min.0°C● vertical installation, max.40°CDecentralized operationPrioritized approx.310gOtherNote:Additional basic error and noise for integration time = 2.5 ms: Voltage: ±250 mV (±0.02%), ±80 mV (±0.05%), ±50 mV (±0.05%); resistance: 150 ohms ±0.02%; resistance thermometer: Pt100 climate: ±0.08 K, Ni100 climate: ±0.08 K; thermocouple: Type B, R, S: ±3 K, type E, J, K, N, T: ±1 K


Buy Now

Related Items:

Siemens Simatic S7-1500 6ES7505-0RB00-0AB0 (6ES7 505-0RB00-0AB0) Factory Sealed picture

Siemens Simatic S7-1500 6ES7505-0RB00-0AB0 (6ES7 505-0RB00-0AB0) Factory Sealed

$3650.00



New Siemens 6ES7515-2AM02-0AB0 CPU 1515-2 PN 6ES7 515-2AM02-0AB0 S7-1500 picture

New Siemens 6ES7515-2AM02-0AB0 CPU 1515-2 PN 6ES7 515-2AM02-0AB0 S7-1500

$2050.00



New Siemens 6ES7515-2AM02-0AB0 6ES75152AM020AB0 SIMATIC S7-1500 CPU 1515-2 PN picture

New Siemens 6ES7515-2AM02-0AB0 6ES75152AM020AB0 SIMATIC S7-1500 CPU 1515-2 PN

$2090.00



Popular Forums