Solid Copper water block liquid exchanger cold plate CNC machined CPU cooling for Sale

Recent Threads

Solid Copper water block liquid exchanger cold plate CNC machined CPU cooling For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Solid Copper water block liquid exchanger cold plate CNC machined CPU cooling:
$37.95

All copper water block Liquid heat exchanger to rapidly remove heat from CPUs, Xbox CPUs, GPUs, video cards, IGBTs ( SOT-227 cooling ), power electronics, lasers, peltier TECs or power generation TEGs. Most efficient method of removing heat from electronics.

Heat removal is 4 to 5 times greater with this water block than using just a finned heat sink.

Components can be mounted to one or both sides thereby allowing heat removal from two 40x40mm TECs or other electronic components at the same time.

All copper construction allows for parts and components to be soldered to cold plate for maximum thermal conduction.

Superior manufacturing, CNC machined from solid copper. Do not confuse this cold plate (waterblock) with inferior cheap water blocks that will NOT deliver on cooling ability. You get what you pay for.

100% Made in the USA by Custom Thermoelectric, LLC., based in Bishopville, Maryland.

Measures: 1.62 x 1.62 x 0.55 inches

Weighs: .34 lbs (154 gm)

Inlet and Outlet on the same side.

Usable flat area of 1.62 x 1.62 inches (41 x 41 mm) per side

Inlet & outlet tapped 1/16\" NPT: Comes with 2 pieces Nylon barbed tube fittings for 3/16\" ID tubing.

Will accomodate per side;

Single TECs or TEGs up to 40 x 40mm

2, 3, or 4 TECs up to 20 x 20mm

Any component (to be cooled) up to 41x41mm

CNC Machined from a solid billet of copper. solder brazed together to a 100 psi rated watertight seal.

Minimum flow rate: 0.1 gpm. Maximum flow rate: 2.5 gpm.

Water flow rate GPMThermal Resistance Drawing of Water Block:

PDF of Thermal Resistance graph for this Water Block:

3D Solid models are available at no charge, just ask.

Matching cold plate (last picture) is part number CPT-2.25-1.62-0.25-AL and is NOT included in this sale.

NOTE: Some pictures show the water block as seperate pieces. This is only to show the details of the high heat transfer efficiency design of the interior surfaces. All water blocks come assembled ready to use.

Water blocks are also called;

Waterblock or waterblocks

Cold plate or cold plates

Liquid exchanger or liquid heat exchanger

Liquid manifold

Water jacket

Liquid cooler

Liquid cold plates

Liquid heat sink or liquid heatsink

Water cooling

Liquid chassis

Custom waterblocks available. Please contact us.
.