When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Notice:
Dear friends, in order to improve the speed and efficiency of the work and better services for buyers,please specify the declared value in invoice, to avoid unnecessary trouble at customs.
In addition, BrazilandArgentinacustomer pls leave yourCPForCUITnumber after payment!
Russiancustomerbest tell the full name, or will affect the delivery time.
Thank you for your assistance!
1) 3KW ER20 Air-cooled Spindle motor Engraving milling Grind
Specification:
Material:Stainless Steel
Size:88x98x300mm
Power:3Kw
Voltage:220-380VAC
Current:8.6A
Frequency:0-300Hz
Speed:0-18000rpm
Cooling:Air-cooled
Runout off:Less than 0.05mm
Bearing Lubrication:Grease
Collet size:ER203.175 mm,4mm ,6 mm,8mm,10mm,12.7mm (one spindle with 1 collet)
Bearings:4 bearings(C7005x2 + C7002x2),P4 class, Angular contact bearings
Power Interface:Optional GX16 waterproof air plug, there are marked 1234,123 were connected to theinverter powersupply (U, V, W), 4 connectedinverter ground.
Net Weight:7 kg
Main application:Wood, Aluminum, Stone, metal, glass, PVC industry
1. Structural features
1) High speed electric main bearing all adopt the C-class high-speed angular contact ball bearing, axis sets of loading, Improve spindle in the high-speed rotation supporting stiffness and precision grinding.
2) Before driving, rotation of the shaft by hand.Spindle high speed rotation caused by temperature rise, use of cooling liquid circulating system to eliminate.
2. Instructions for use
1) In use, must first connect the cooling water pipe, make spindle connect cooling water and then start.
2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.
3) Before driving, cooling water for grinding workpiece can’t be in the front end of the spindle cover, to prevent the front bearing cover slot inlet burning motor and bearing. the motor must not enter the water, after turned on of the motor, when you live in grinding the workpiece to open the grinding of workpieces coolant. First off the workpiece coolant shutdown, and then close the spindle motor.
3. Maintenance and Service
1) Motorized spindle by medium frequency power supply rated voltage, frequency should be consistent with electric spindle technology parameters, motorized spindle rotational speed can change the frequency to adjust, also directly proportional voltage change.
2) When the spindle is temporarily not in use, should use compressed air to blow the coolant water,to avoid rusting, plug the hole. Spindle surface should be coated with anti rust oil. The shaft end protecting device, placed in dry place.
3) If replacement the spindle of bearings, best professional and technical personnel from the replacement. Use special tools, stator coil does not to be removed.
2) Inverter VFD ProductFeature:
1)PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
2)Easy PLC function can realize 16 legs of speed and inverter control function;
3)RS485 communication port, adopting standard international MODBUS main circuit control;
4)With extremely strong anti-jamming capability
5)Low output ratting torque0.5HZ-150%, low speed running ability;
6)Carrier adjustable by 16KHZ, completely soundless working environment;
7)Broad voltage working area, normal running in 304V-456V;
8)Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
9)Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
10)With perfect error protection and short circuit starting protection capability;
Tech parameters:
1) Input Voltage: 220V(+/-15%) ,We also stock 110V(+/-15%), please contact us
for item stock.
2) Output Voltage 110 VAC or 220VAC
3) Input Frequency: 48-63 Hz
4) Output Frequency: 0-400 Hz
5) Input Phase: 1 or 3 phase
6) Output Phase: 3 phase
Shipping
USA round 7-10 business days
UK,Candana,Australia,New Zealand,Asia 15-25business days
South America,other countries 20-35 business days
DHL5-8 business days
EMS4-10 business days
Payment
We accept paypal payment only, all Paypal must be confirmed(shipping and billing address must match and correct and it need tell us your telephone no for delivery)
Refund
Contact us
1/4” Extra Long Carbide Square End Mill 3 Flute HRC 55 Degree CNC Mill Drill Bit
$13.89
20mm CNC Metalworking Square Rotary Broaching Tool Sq-B
$89.00
Sq-C 20mm CNC Metalworking Square Metal Rotary Broach
$84.00
Popular Forums