TNM5000 Universal Nand Flash JTAG ISP Programmer+10pcs IC Socket+K9GAG08U0E-SCB0 For Sale

TNM5000 Universal Nand Flash JTAG ISP Programmer+10pcs IC Socket+K9GAG08U0E-SCB0
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

TNM5000 Universal Nand Flash JTAG ISP Programmer+10pcs IC Socket+K9GAG08U0E-SCB0:
$515.00

TNM 5000 supportedLanguage:English / Russian/ Arabic / French / Polski / Turkish / Persian / Chinese

TNM5000Selling Points:1.very fast becuase we use USB 2 for connect to PC2.PIN detect and detect of ic,for example in pin detect if one or more pin in chip no conect at ZIF soket TNM5000 will inform you3. device list is 23000 chip4. no need power supply

TNM 5000 Programmer Feature:


*23000+Supported Devices Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).*48-PinsZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.* USB 2.0High Speed,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.*Auto detectionof most flash Memories/Microcontrollers with Device ID.


* User-friendly software forWindows XP/VISTA/7/8 (32,64 bits). In addition, can supportmultiple languages(English / Chinese / Arabic / French /FARSI/Russian/Polish......). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.*Multiple Programmingis possible by attaching 2 or more Programmers to one PC.* Very low cost Main Unit & Low cost adaptors by using one adaptor for all 32/40/48 TSOP flash memories . All 56 pins flash memories by one TSOP56 adaptor.* Special Abilities like, ALtera U S B B l a s t e r Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

TNM5000 Programmeris very fast , Low cost , High performance Universal Programmer , specially designed for supporting Flash memories , Nand flashes , Serial EEPROMS , Microcontrollers & Automotive ECU , Dashboard parts.The Heart of TNM5000 is a 500.0000 Gate FPGA with a designed CPU core with 96MHz Clock for fast programming of chips.
TNM5000Can support a wide range of chips as below:

Parallel Flash Memories:up to 56 pins parallel flash memories are supported by TNM5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP & ...). All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 2000 flash chips.

Nand Flash Memories:TNM5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. TNM5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories:All 8-16 Pins Serial SPI flash memories are supported by TNM5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second) . Also it Unprotects the write protected flashes before writing data to it.

Microcontrollers:

ATMEL: All AVR 8 bits chips (ATMEGA/ATTINY/AT90S) are supported on ZIF Scocket & by ISP cable. High Voltage Parallel on ZIF Programming of AVR up to 64 pins is supported. newly introduced ATXMEGA Series are supported by both PDI & JTAG Method. Old C51 series & new single cycle C51 series are completely supported. All the above series can be detected automatically by TNM5000. ARM7 programming by JTAG is supported.

Microchip: One of the most complete device list for microchip PIC microcontrollers including all PIC12F /PIC12C /PIC16C / PIC16F / PIC18F / DPIC33F / J & K Series. Devices up to 40 Pins can be programmed on ZIF , All PICs can be detected automatically & programmed by ISP cable.

Others: ST, SST, Philips (NXP) , Motorola , Syncmos, Silicon Lab , ICSI , Infineon , Intel , Winbond & ...

Automotive MCUs:Supporting of ST10F & TMS370 Series by ISP cable for many BOSCH/VALEO/SAGEM ECUs (complete ST10F support ofXPROG-mprogrammer device list). supporting of siemense & infineon SAK-C167 connected to 44 or 48 pins flash (Siemense/BOSCH/SAGEM S2000 ECU) likeHSE FlasHitProgrammer. Supporting NEC & Motorola Devices for Dashboards.

PLD/CPLD/FPGA:Supporting All ALTERA JTAG Devices by emulation ofUSB BlasterProgrammer in Quartus Software. Supporting of Xilinx CPLD/FPGA with jed file. Fast Xilinx FPGA configuration with bit file. Supporting of GAL/PALCE Devices with special option for PALCEunlocking.

Software:With multiple language support (English / Chinese / Arabic / French /FARSI). More languages & Devices can be added by customer request. You Can Download Software & run it in Demo mode to evaluate it.



ADAPTORS:We have a policy for minimum price for adaptors, our adaptors can be used for many different packages. In many cases we support other programmer manufacturers adaptors on our device. Here are example of some of our adaptors:

For All 32/40/48 Pins TSOP Type-1 (20mm Pin-Pin Lenght) , You Need Only one adaptor Model 548T2




For All 56 Pins TSOP Type-1 (20mm Pin-Pin Lenght) , You Need Only one adaptor Model 556T2 , with different sets of bottom plates which can be easily exchanged by user.


Some available adapters:








1PC TNM5000 Programmer1PC USB Cable (for both power supply and data communication)1PC Installation CD1PC ISP cable10PCS adapters+1PC Nand Chip+1PC Vacuum Sucking Pen+1PC IC extractor+1PC Test Clip:
1.1PCOne complete TSOP56 adapters set (ADP556T2)2.1PCOriginal TNMTSOP48-DIP48 (ADP548T2) adapter3.1PCSOIC16-DIP16(150 mil) (516S2-150) adapter4.1PCSOIC20-DIP20(200 mil) (520S2-200) adapter5.1PCSOIC28-DIP28(300 mil) (528S2-300) adapter6.1PCPLCC20-DIP20 (520Q4) adapter7.1PCTSOP32-DIP32 (532TS2) adapter8.1PCSSOP28-DIP28(170 mil) (528TS2)adapter9.1PCSOP44-DIP40 adapter10.1 PCSOP16/S0P8 simple adapter11.1PC PLCC IC extractor12.1PC SOIC8 SMD Programming/Testing Clip13.1PC K9GAG08U0E-SCB0 Nand Chip14.1PC Vacuum Sucking Pen
(Only original TNM TSOP48 adapter is for all TSOP48/40/32 chips,other brand TSOP48 adapter can not work for 32pins or 40 pins,only can work for part of 48 pins.)





Buy Now

Related Items:

ProMan Professional programmer repair tool copy NAND FLASH chip data recovery picture

ProMan Professional programmer repair tool copy NAND FLASH chip data recovery

$92.10



XGECU TSOP48-DIP48 Adapter SN-ADP-048-0.5/70-0065/SA247 for universal programmer picture

XGECU TSOP48-DIP48 Adapter SN-ADP-048-0.5/70-0065/SA247 for universal programmer

$9.90



TSOP48 adapter/ adaptor/ IC socket for 48-pin ZIF socket universal programmer picture

TSOP48 adapter/ adaptor/ IC socket for 48-pin ZIF socket universal programmer

$12.00



Popular Forums