When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
HU520 is a small milli signal generator that can generate two kinds of voltage signals (-10mV~+110mV and -100mV~+1100mV) to calibrate thermocouples.
The module increases the output of two types of thermocouple signals, as long as the input temperature is converted to the corresponding voltage output.
The module is simple to use, and the data is input by key operation, and the output is updated immediately.
Product application:
Signal generator;
Instrument calibration;
Two. Technical parameter table:
A description of the output range of the output range
Voltage 100mV -10mV~+110mV 0.01mV maximum output current +/-5mA
Voltage 1000mV -100mV~+1100mV 0.1mV
Thermocouple K -200~+1370 0.1\'C
Thermocouple N -200~+1300 0.1\'C
Working voltage 7~12 VDC
Working current <50 mA
Size 57*45*20 mm long X wide X height
Three, interface description and related operations
P1 interface (power supply)
VDD: power source (7 ~ 12V)
GND: power supply negative pole
P3 interface (output signal)
CH1: channel 1, producing -10mV~+110mV.
CH2: channel 2, producing -100mV~+1100mV.
GND: power supply negative.
Four. Operation Description:
(1) key Description:
UP: on the page;
DOWN: next page;
ADD: self - added key;
SUB: self reducing key;
FUN: function key; (select the operating bit for setting the data)
4.1. Generate -10mV~+110mV voltage
Interface display font:
The first line \"1. P1:-10mV~+110mV\"
The second line \"*0.01 0.00mV\"
Channel 1, producing -10mV~+110mV
4.2. Generate -100mV~+1100mV voltage
Interface display font:
The first line \"2. P2:-100mV~+1100mV\"
The second line \"*0.1 0.0mV\"
Channel 2, producing -100mV~+1100mV
4.3. Generate K type thermocouple signal
Interface display font:
The first line \"3.P1:K-TC\"
The second line \"*0.1 0.0\'C\"
Channel 1, K type thermocouple signal -200 ~ +1370 degree
4.4. Generate N type thermocouple signal
Interface display font:
The first line \"4.P1:N-TC\"
The second line \"*0.1 0.0\'C\"
Channel 1, N type thermocouple signal -200 ~ +1300 degree
Delivery: 1pcs
Jofra CTC 650A Ametek Temperature Calibrator Ametek CTC 650A RS232
$2000.00
REED Instruments R2810 Thermocouple Calibrator
$349.00
ET3801 Dry Block Temperature Calibrator -30℃-1200℃ On-site Temperature Calibrati
$1540.00
Popular Forums