BlackBerry Forums Support Community - View Single Post - Cable Issue

Duelfuel · 02-22-2019, 12:02 PM

I've run into an odd issue; I recently purchased an original GoPro, that has the Micro USB out only. I wanted to play back some of the videos on my Z30, so needed an adapter cable to go from Micro USB to the mini HDMI. These cables are referred to as "Micro USB OTG"

I have hooked up the camera to my phone, and it works the first time. Phone displays USB device inserted, then blinks Removed, then says Inserted. I then can watch my videos, but if I take it out, and try again, the phone never senses that it is connected again? If I take out a new cable (trying this in the store), it goes through the same process, but will never allow the same cable to be plugged in and sense the device. It's almost like every individual cable has its own IP, and it won't allow it to connect again.
Thoughts?

02-22-2019, 12:02 PM	#1
Duelfuel New Member Join Date: Feb 2019 Model: Z30 PIN: N/A Carrier: Bell Posts: 1	Cable Issue - Micro USB to Mini HDMI Please Login to Remove! I've run into an odd issue; I recently purchased an original GoPro, that has the Micro USB out only. I wanted to play back some of the videos on my Z30, so needed an adapter cable to go from Micro USB to the mini HDMI. These cables are referred to as "Micro USB OTG" I have hooked up the camera to my phone, and it works the first time. Phone displays USB device inserted, then blinks Removed, then says Inserted. I then can watch my videos, but if I take it out, and try again, the phone never senses that it is connected again? If I take out a new cable (trying this in the store), it goes through the same process, but will never allow the same cable to be plugged in and sense the device. It's almost like every individual cable has its own IP, and it won't allow it to connect again. Thoughts?
Offline