Thermostat Temperature Control Switch Sensor Smart Module Controller DC 12V BE For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thermostat Temperature Control Switch Sensor Smart Module Controller DC 12V BE:
$2.79
Specifications:
- Temperature range :-50-110 ℃
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Resolution:When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
- Control accuracy: 0.1 ℃
- Hysteresis accuracy: 0.1℃
- Refresh rate: 0.5S
- High temperature protection: 0-110℃
- Supply voltage: DC 12V
- Static current: ≤ 35MA, attract current ≤ 65MA
- Output voltage: DC 12V
- Output power: 20A relay
- Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 ℃ ,Humidity 20% -85%
How to use:
- Connect the power supply and the load, you can supply to the controller,
- Is displayed as a measured temperature,
- Press the SET button, the display flashes the temperature,
- Press - to set the desired temperature,
- After setting press SET to confirm return,
- The controller automatically performs the relay by setting off!
- Lights, LED status descriptions:
- Indicator: Off The relay is switched off, Always indicate the relay is closed.
- LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Package Included:
- 1 x -50-110°C W1209 Digital thermostat Temperature Control Switch 12V + range :-50-110 ℃
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Resolution:When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
- Control accuracy: 0.1 ℃
- Hysteresis accuracy: 0.1℃
- Refresh rate: 0.5S
- High temperature protection: 0-110℃
- Supply voltage: DC 12V
- Static current: ≤ 35MA, attract current ≤ 65MA
- Output voltage: DC 12V
- Output power: 20A relay
- Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 ℃ ,Humidity 20% -85%
How to use:
- Connect the power supply and the load, you can supply to the controller,
- Is displayed as a measured temperature,
- Press the SET button, the display flashes the temperature,
- Press - to set the desired temperature,
- After setting press SET to confirm return,
- The controller automatically performs the relay by setting off!
- Lights, LED status descriptions:
- Indicator: Off The relay is switched off, Always indicate the relay is closed.
- LED: Shows LL is the sensor open, showing ?HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
Package Included:
- 1 x -50-110°C W1209 Digital thermostat Temperature Control Switch 12V + sensor
Related Items:
Robert Shaw Oven Heat Control Cooking Instruction Thermostat Temperature 4911 5C
$21.50
Toastmaster Kitchen Appliance Temperature Controller Thermostat Vintage
$39.99
TCFUNDY Electronic Cigar Cooler Humidor Cedar Wood Shelf Storage 400 Capacity US
$471.81