4.5KW Air Cooled ER32 Spindle Motor 220V AC & 4.5KW VFD Driver Inverter Woodwork For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4.5KW Air Cooled ER32 Spindle Motor 220V AC & 4.5KW VFD Driver Inverter Woodwork:
$799.00
- Store Home
- |
- New Arrival
- |
- Ending Soon
- |
- Add to Favourites
- |
- View response
- |
- Contact us
- Linear Guide Rail
- Ball Screw
- CNC Spindle Motor & Tool Parts
- VFD inverter
- Stepper Motor & Driver
- Servo Motor & Driver
- HMI & PLC Panel
- Mini Metal Lathe
- CNC Router & Tools
- CNC Tool Accessories
- CNC Repair Parts
- New Arrival
4.5KW Air Cooled ER32 Spindle Motor 220V AC & 4.5KW VFD Driver Inverter Woodwork
Package included :
1 x 4.5kW Spindle Motor: GDZ120*103-4.5
1 x 4.5KW sunfar VFD Variable Frequency Drive: E550-2S0045L
Note : Provide the default Collet ER32 12.7mm, if notpleasedocontactus for a better solution.
4.5KW Spindle Motor Specifications :
Model GDZ120*103-4.5 Product type Square High-Speed Motorized Spindle Motor for Woodworking Brand Changsheng(Made in China) Speed 18000rpm Power 4.5KW Voltage 220V Current 16.5A Frequency 300Hz Collet ER32 12.7mm default Lubrication Grease Cooling type Aircooling Bearings 2x7008c P4 2x7004c P44.5KW VFD Specification :
Model E550-2S0045L Power (KW) 5.5KW Input Voltage(V) 1-phase AC 220V ±20% 50/60Hz Output Voltage(V) 0~220V Output Current(A) 21A Output Frequency (Hz) 0~1000Hz Origin& Warranty&brand China & One year&sunfar Kindly Note :-
Motorized spindle motors are matched with inverters, choosing inverters should be according to the current, voltage, and frequency of motorized spindle motors.
-
Setting the inverter must firstly set up the basal frequency, its basal frequency is based on the highest frequency of motorized spindle motor, if not setting the basal frequency (the factory setting is 50Hz),the motorized spindle motor would burn out once start running;
-
The highest frequency, break frequency and the corresponding voltage also should be set according to the curve on the operating instruction; setting the current of the inverters is also based on the rated current of motorized spindle motor;
-
The overcurrent is 120% of rated current; overload tripping is 100%, time is 5s;
Carrier frequency is set by the power of spindle motor,8kHz for less than 10KW motorized spindle motor, 5kHz is for more than 10KW spindle motor; -
The acceleration time and deceleration time are 10s and 20s respectively, if starting current exceed the rated current and need protection, it should extend the acceleration time.
-
I/O lack-phase protection also should be set above the function of protecting inverters and motorized spindle motors.
-
Connecting the inverter and the three-phase power of spindle motor, solder the inverter three-phase power cord on the plug 1(U1),2(V1),3(W1), plug 4 is ground wire. Then the inverter is connected with the external power supply and start work, then to check whether the rotation direction of spindle motor is consistent with its indication direction, if inconsistent, immediately shut down and change two wire on the three-phase power supply of connecting inverter and motorized spindle motor. The motorized spindle motor is prohibited running in the wrong rotation direction.
-
Power lines should be taken waterproof and shielding measures. The connection between motorized spindle motor and inverter should not exceed 25m.When the power cord of the water-cooled spindle motor connects the terminal block, it must be bent into U shape and fixed on the bottom of the terminal block and then connect, so that can protect the condensed water of the power cord into the terminal block.
-
Another, use shielding power lines to prevent its interference to inverter.
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs . These charges are the buyer\'s responsibility.
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount.Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging.
Fast to Buy Limited - CNC Solution is specialized in CNC parts and solutions, we supply Fanuc,Mitsubishi, Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide rail, 3D printer parts, etc.
If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you .
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately.
But within above working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and wait till Monday.
Please contact us with message.
Please feel free to contact us if you have any questions.
Related Items:
Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/store/relateditems.php on line 72
