5/12V/24V Multifunction Self-lock Relay Module PLC Cycle Timer Delay Time Switch For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5/12V/24V Multifunction Self-lock Relay Module PLC Cycle Timer Delay Time Switch:
$4.99
Welcome to my store! You will find your favorite products. Pass by do not miss.thank you!Product DetailDescription:100% Brand New and High QualityCR03 multifunction relay control module, designed specifically for a variety of users with different needs, the use of micro-controller as the primary Control unit, preset up to 18 kinds of functions, and can be based on user needs, customize and add other specific functions. Genuine high quality power relay modules, high power high-voltage transistor, red, blue signal lights, military grade double-sided PCB board, cloth board to consider a comprehensive, stable performance, can be widely used in a variety of power control type applications. Features:
1.2015 has been newly version, the module features 18 kinds, to meet the needs of more applications;
2. Increase the supply anti-reverse function, and does not take the wrong power supply module is damaged;
3. The use of top-quality high-voltage power supply modules, separate power supply before replacing the system more stable and reliable;
4. 0.1 seconds / 1 second / 1 minutes three timing function, timing accuracy 0.01 seconds;
5. Automatic power-saving feature, users can independently set.Operation instruction:
1. Power on display countdown
2, Set the time range: In working condition, press UP key,
Display --0X (- 01/02/03); Press the UP key to scroll X,
Press the Enter key (Enter) to confirm the save.
--01: 0.1 seconds (0.1-999.9 sec)
--02: 1 second (1-9999 seconds)
--03: 1 minute (1-9999 points)
Set features:
(1) Press the SET key to enter the function selection, display P-0X;
(X: 1-18) may press the SET button to select the corresponding function, press Enter to confirm.
(2) Press the UP / DOWN to subtract T1 time, press the Enter key to confirm.
(3) Press the UP / DOWN to subtract time T2, press Enter to confirm.
(4) Press the UP / DOWN to subtract NX times, press Enter to confirm. Setup is complete, the control panel to work.1, the module function:The user can through the keys and display, a choice of the following 18 kinds of function, can set and save function parameters, can also view the current function parameters, time parameter setting minimum 0.1 seconds adjustable, Accuracy is better than that of 0.01 seconds.Tips: Function 1-8 start at power on their own, functional 9-18 need high pulse signal (high duration shorter than 20ms, the same applies hereinafter) is triggered to start. Function 1:
Timing Pick: After power-up, the time delay relay T1, T1 between 0.1 seconds -270 hours adjustable, CH1 interfaces to a high level pulse signal, repeat the above functions;
Function 2:
Timing off: When the power relay, time delay relay disconnected T1, T1 between 0.1 seconds -270 hours adjustable, CH1 interfaces to a high level pulse signal, repeat the above functions;
Function 3:
Re-timed pull off: After power relay to not pull, the delay time T1 reaches relay; pull off the relay T2 arrives, the delay time T1 and T2 in 0.1 seconds -270 hours adjustable from an interface to CH1 High pulse signal, repeat the above functions;
Function 4:
Then pull off the timing: After power, immediately pull the relay, the relay off after the delay time T1 arrive; arrive after disconnecting relay time T2, -270 hour in 0.1 seconds delay time between T1 and T2 Adjustable, CH1 interfaces to a high level pulse signal, repeat the above functions;
Function 5:
Infinite loop timing mode 1: After power relay to not pull, the delay time T1 reaches relay; pull off the relay T2 arrives, and then repeat the above condition, the delay time T1 and T2 at 0.1 Adjustable seconds between -270 hours, to a high level pulse signal CH1 interface, you can restart the above functions;
Function 6:
Infinite Loop Timing Mode 2: After power, immediately pull the relay delay time T1 reaches the relay off; arrive after disconnecting relay time T2, and then repeat the above condition, the delay time T1 and T2 in 0.1 seconds adjustable between -270 hours, to a high level pulse signal CH1 interface, you can restart the above functions;
Function 7:
Finite loop timing mode 1: Based on the function 5, increasing the number of cycles feature, this time between T1 and T2 in 0.1 seconds -9999 seconds adjustable, NX cycles adjustable between 1-9999 times, the interface to CH1 a high level pulse signal, these functions can be re-started;
Function 8:
Finite loop timing mode 2: 6 function on the basis of increased functionality cycles, this time between T1 and T2 in 0.1 seconds -9999 seconds adjustable, NX cycles adjustable between 1-9999 times, the interface to CH1 a high level pulse signal, these functions can be re-started;
Function 9:
Latching relay modes: give relay CH1 interfaces to a high level pulse signal, the relay pull, again to give a high level pulse signal relay disconnected.
Function 10:
Trigger relay modes: CH1 interfaces to a high signal relay, relay, high disappear, relay disconnected.
Function 11:
Pull trigger timing: After power relay does not act, CH1 interfaces to a high level pulse signal, the time delay relay T1, T1 in adjustable between 0.1 seconds -270 hours, a high-level interface to repeat to CH1 pulse signal, repeat the above function;
Function 12:
Trigger timing off: After power relay does not act, a high-level interfaces to CH1 pulse signal relay, the relay off delay time T1, T1 between 0.1 seconds -270 hours adjustable, repeat to CH1 Interface a high level pulse signal, repeat the above functions;
Function 13:
Pull the trigger and then disconnect the timing: After power relay does not act, the interface to a high level pulse signal CH1, arrived after the delay time T1 relay; pull off relay arrives after T2, T1 and delay time T2 is adjustable between 0.1 seconds -270 hours, repeat the interface to a high level pulse signal CH1, repeat the above functions;
Function 14:
Disconnect and then pull trigger timing: After power relay does not act, the interface to a high level pulse signal CH1, immediately pull the relay, the relay off after the delay time T1 arrive; arrive after disconnecting relay time T2, delay time between T1 and T2 -270 hours adjustable 0.1 seconds, repeat the interface to a high level pulse signal CH1, repeat the above function;
Function 15:
Infinite loop timing mode 1: After power relay does not act, give a high level pulse signal CH1 interfaces, the delay time T1 reaches relay; pull the relay off time T2 arrive, and then repeat the above state, the extension When the time between T1 and T2 -270 hours adjustable 0.1 seconds, repeat the interface to a high level pulse signal CH1, the above function can be restarted;
Function 16:
Infinite Loop Timing Mode 2: After power relay does not act, CH1 interfaces to a high level pulse signal, immediately pull the relay, the relay off after the delay time T1 arrive; break time T2 after reaching relay, then Repeat the above state, the delay time between T1 and T2 -270 hours adjustable 0.1 seconds, repeat the interface to a high level pulse signal CH1, the above function can be restarted;
Function 17:
Finite loop timing mode 1: 15 on the basis of functionality, increasing the number of cycles feature, this time between T1 and T2 in 0.1 seconds -9999 seconds adjustable, NX cycles adjustable between 1-9999 times, repeating to CH1 interface to a high pulse signal, you can restart the above functions;
Function 18:
Finite loop timing mode 2: 16 on the basis of functionality, increasing the number of cycles feature, this time between T1 and T2 in 0.1 seconds -9999 seconds adjustable, NX cycles adjustable between 1-9999 times, repeating to CH1 interface to a high pulse signal, you can restart the above functions;
2. specifications:Operating Current:
5V / less than 90mA (when the relay is not operating less than 15mA, turn off the display less than 3mA)
12V / less than 50mA (when the relay is not operating less than 15mA, turn off the display less than 3mA)
24V / less than 35mA (when the relay is not operating less than 15mA, turn off the display less than 3mA)
Working Temperature：-20℃—60℃(Limit range-30℃—70℃)
Load Capacity:
the module normally open interface maximum load capacity: DC 0-30V/10A，AC 0-250V/10A
the module normally closed interface maximum load capacity: DC 0-28V/10A，AC 0-125V/10A
3, module interface :
Module control terminal: 3-wire interface, all interfaces are terminal, user-friendly
1, VCC: DC power positive (with 5V, 12V and 24V modules to choose from)
2, GND: DC power supply negative
3, IN: input detection interface, active high
Relay outputs: 3-wire interface, all interfaces are terminals
1, CK: normally open relay interface and relay vacant before relay pull, short connect with COM after the pull .
2, COM: Common Interface Relays
3, CB: NC relay interface and short with COM before relay pull, vacant after the pull.Package Included:
1x Programmable PLC Delay Time Switch Delay Relay module response> We maintain hightest buyer ratings > Positive response will be much appreciated from you.> Any dissatisfaction, please contact us immediately!> Please do not leave neutral or negative response before we help you out. Payment
> We accept PayPal only.
> All major credit cards are accepted through secure payment processor PayPal.
> Payment must be received within 7 days of sale closing.
> We Ship to Worldwide.
> Items will be shipped within one business day on payment received.
> Items are shipped from China using Airmail, delivery time depends on destination and other factors,reach most of the countries within 10 to 35 business days.
Country
Shipping Way
Shipping Time
Tracking Number
United States
USPS(ePacket)
7-12
Yes
Russian
China Post
15-35
Yes
Other Country
HK /Swiss Post Air Mail
15-45
No
Brazil / Africa
HK /Swiss Post Air Mail25-55 No Returns> Defect: We will fully refund or send you a new replacement,please contact and return within 14 days.
> Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods.
> Missing parts/Q\'ty: Please contact us immediately,for a new package arranged,or a partial refund issued.
Related Items:
Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/store/relateditems.php on line 72
