A16B-2201-0101 A16B22010101 Fanuc 0 Memory board For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
A16B-2201-0101 A16B22010101 Fanuc 0 Memory board:
$1005.00
RECONDITIONED AND TESTED (PURCHASEVALID ONLY WITHIN UNITED STATES)
This listing is for purchase of above mentioned Fanuc Part
PLEASE READ THE FOLLOWING IMPORTANT NOTES ABOUT THIS PART(1) Fanuc 0 Memory Board is where your machine\'s CNC parameters, PMC data, part programs,tool offset etc. are stored. When you have problem with this board and when you replace itall data will be LOST and MUST BE restored.(2) It is NOT our responsibility to provide you with data. If you do not have this data, you must contact your machine builder or dealer.We will provide you with generic instructions on how to reload CNC and PMC data.(3) The replacement board DOES NOT come with ROM & RAM chips (see picture). These must betransferred from your original board. Use caution when removing these chips since you can easilybend or break the pins. PMC chips (again, see picture) are almost impossible to obtain anywhere EXCEPTfrom your machine builder (who may no longer be in business).In short, if you are not sure about it, we STRONGLY recommend you send us your original board and let ustest it to make sure it is the problem THEN purchase the board and that way we can transfer the chips to new board (you will still have to reload data after you install it in your machine).- RETROFITTING/ INTEGRATION SUPPORT NOT INCLUDED WITH PURCHASE. Ideal purchase for this control package will be for your mission-critical machine.
NO RETURNS ACCEPTEDThis unit has been cleaned, repaired and tested for full function. Paypal only and we DO NOT ship outside of the U.S.Please contact us if you have any questions.
Related Items:
Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/store/relateditems.php on line 72
