Acopos 1090 Servo Drive For Sale

Acopos 1090 Servo Drive
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Acopos 1090 Servo Drive:
$480.00

ACOPOS servo drive, 3x 400-480 V, 8.8 A, 4 kW, line filter, integrated braking resistor and electronic secure restart inhibit
  • Modular mechanical design using plug-in modules
  • Integrated line filter
  • Integrated braking resistor
  • All connections are made using plug-in connectors
  • Integrated electronic restart inhibit


General information

B&R ID code0x12C8 Slots for plug-in modules4 Certification CEYes KCYes ULcULus E225616
Power Conversion Equipment Functional Safety Yes
  • Mains connection
  • Permissible power mains formsTT, TN Mains input voltage3x 400 VAC to 480 VAC ±10%
    3x 230 VAC ±10% Frequency50 / 60 Hz ±4% Installed loadMax. 10 kVA Inrush current at 400 VAC7 A Switch-on interval>10 s Integrated line filter in accordance with EN 61800-3, Category C3 Yes Power loss at max. device power without braking resistorApprox. 200 W
  • DC bus connection
  • DC bus capacitance470 µF
  • 24 VDC supply
  • Input voltage 24 VDC ±25% Input capacitance8200 µF Current consumption Max. 2.5A + current for motor holding brake
  • Motor connection
  • Quantity1 Continuous current 8.8 Aeff Reduction of continuous current depending on the ambient temperature Mains input voltage: 400 VAC Switching frequency 5 kHzNo reduction Switching frequency 10 kHz0.18 Aeff per °C (starting at 54°C) Switching frequency 20 kHz0.18 Aeff per °C (starting at 30°C) Mains input voltage: 480 VAC Switching frequency 5 kHzNo reduction Switching frequency 10 kHz0.18 Aeff per °C (starting at 48°C) Switching frequency 20 kHz0.18 Aeff per °C (starting at 18°C) Reduction of continuous current depending on the installation elevation Starting at 500 m above sea level0.88 Aeff per 1000 m Peak current24 Aeff Nominal switching frequency10 kHz Possible switching frequencies5 / 10 / 20 kHz Electrical stress of the connected motor in accordance with IEC TS 60034-25 Limit value curve A Max. motor line length25 m Protective measures Overload protectionYes Short circuit and ground fault protectionYes Max. output frequency598 Hz
  • Motor holding brake connection
  • Response threshold for open circuit monitoringApprox. 385 mA Max. output current1 A Max. number of switching cyclesUnlimited since handled electronically
  • Braking resistors
  • Peak power output7 kW Continuous power200 W
  • Limit switch and reference inputs
  • Quantity3 WiringSink Electrical isolation Input - ACOPOSYes Input - InputNo Input voltage Nominal24 VDC Maximum30 VDC Switching threshold Low<5 V High>15 V Input current at nominal voltageApprox. 4 mA Switching delayMax. 2.0 ms Modulation compared to ground potentialMax. ±38 V
  • Enable inputs
  • Quantity1 WiringSink Electrical isolation Input - ACOPOSYes Input voltage Nominal24 VDC Maximum30 VDC Input current at nominal voltageApprox. 30 mA Switching threshold Low<5 V High>15 V Switching delay Enable 0 -> 1, ready for PWMMax. 100 µs Enable 1 -> 0, PWM offMax. 2.0 ms Modulation compared to ground potentialMax. ±38 V OSSD signal connections Not permitted
  • Trigger inputs
  • Quantity2 WiringSink Electrical isolation Input - ACOPOSYes Input - InputNo Input voltage Nominal24 VDC Maximum30 VDC Switching threshold Low<5 V High>15 V Input current at nominal voltageApprox. 10 mA Switching delay Rising edge52 µs ±0.5 µs (digitally filtered) Falling edge53 µs ±0.5 µs (digitally filtered) Modulation compared to ground potentialMax. ±38 V
  • Electrical characteristics
  • Discharge capacitance660 nF
  • Operating conditions
  • Permitted mounting orientations Hanging verticallyYes Lying horizontallyYes Standing horizontallyNo Installation at elevations above sea level Nominal0 to 500 m Maximum 2000 m Degree of pollution in accordance with EN 61800-5-12 (non-conductive pollution) Overvoltage category in accordance with EN 61800-5-1II EN 60529 protectionIP20
  • Environmental conditions
  • Temperature Operation Nominal5 to 40°C Maximum 55°C Storage-25 to 55°C Transport-25 to 70°C Relative humidity Operation5 to 85% Storage5 to 95% TransportMax. 95% at 40°C
  • Mechanical characteristics
  • Dimensions Width70.5 mm Height375 mm Depth235.5 mm Weight4.4 kg


    Buy Now

    Related Items:
    Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/store/relateditems.php on line 72

    Popular Forums