ArduCAM CC3200 UNO Transparent Acrylic Case MT9D111 2MP Camera Adapter Board For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ArduCAM CC3200 UNO Transparent Acrylic Case MT9D111 2MP Camera Adapter Board:
$39.89
- CC3200 UNO board which is full featured development board almost like a combination of CC3200 Launchpad plus CC3200CAMBOOST pack from TI while keeping exactly the same size as Arduino UNO and pin out.
- It is based on TI simplelink series CC3200 chip, which gives you an ARM Cortex M4 processor with a built-in WiFi stack and radio. It supports things like web servers and SSL out of the box. It can be mated with existing thousand kinds of Arduino shields without effort. It makes writing firmware for these devices easier, since a lot of the work is already done. The collection of libraries aids in getting prototypes running quickly. You can even debug Energia sketches using TI’s fully featured IDE.
- In addition to standard Arduino pin out and Arduino development environment, it also has additional ArduCAM standard camera interface, user can use TI Code Composer Studio (CCS) to develop and debug camera based application.
- ArduCAM CC3200 UNO has build in SWD and JTAG debug circuit, you do not need additional debugger tools to do the debugging. It supports TI CCS and Uniflash seamlessly. If you’re looking to connect things to the internet, with the goal of building some sort of “Internet of Things,” this new ArduCAM CC3200 UNO board is your right option.
- TI CC3200 ARM Cortex M4 Processor with WIFI support
- Arduino UNO Size and Pin Out
- Support ArduCAM Standard Camera Interface and MT9D111 Camera Module
- Onboard JTAG/SWD Debugger
- Support Energia and Code Composer Studio Development Environment
- Aptina MT9D111 camera module with Auto Focus Lenss
- Flex Calbe 0.4mm pin pitch
- Provide pin out and mating connector datasheet and technical supports
- DigitalClarity CMOS imaging technology
- Ultra low-power, low-cost, progressive scan
- 2-megapixel resolution (1,600H x 1,200V)
- 1/3.2-inch optical format
- 15 frames per second (fps) at full resolution
- Integrated auto focus and optical zoom
- Real-time JPEG encoder
- Integrated microcontroller for flexibility
- On-chip image flow processor for single-chip camera module
- On-chip auto focus with configurable GPIO interface
- Mechanical shutter support
- Numerous automatic functions for on-the-fly image correction and enhancement
- Fully automatic Xenon- and LED-type flash support,including fast exposure adaptation
- On-chip, 10-bit analog-to-digital converter
- Two-wire serial interface
- ITU_R BT.656 (YCbCr), 565RGB, 555RGB, 444RGB and raw output data formats
- JPEG 4:2:2 and 4:2:0 output
- ARM Cortex-M4 Core at 80 MHz
- 256KB RAM, 1MB serial flash memory with file system for user
- Hardware Crypto Engine for Advanced Fast Security, Including AES, DES, 3DES, SHA2 MD5, CRC and Checksum
- Up to 27 individually programmable, multiplexed GPIO pins, including a fast parallel camera interface, I2S, SD/MMC, UART, SPI, I2C, and four-channel ADC.
- Dedicated ARM MCU, completely offloads Wi-Fi and Internet Protocols from the Application Microcontroller
- 11 b/g/n Radio
- WPA2 Personal and Enterprise Security
- Station, Access Point, and Wi-Fi Direct Modes
- Powerful Crypto Engine for Fast, Secure Wi-Fi and Internet Connections with 256-Bit AES Encryption for TLS and SSL connections
- SmartConfig Technology, AP Mode and WPS2 for easy and flexible Wi-Fi provisioning
- The power-management subsystem includes integrated DC-DC converters supporting a wide range of supply voltages. This subsystem enables low-power consumption modes, such as the hibernate with RTC mode requiring less than 7 μA of current
- Easy to use SDK with full APIs with lots of examples for Energia, GCC,IAR Systemand Ti Code Composer Studio (CCS)
Pinout：
Payment Shipping policy Return policy About us Contact us Payment
- We accept Paypal as the payment method.
- The default shipping is by China Post air mail/Hongkong air mail.
- We provide combined shipping to USA by e-Packet service. When you place order for multi items,please contact us. We will only charge you 1.8USD shipping cost for the whole order.
- Item will be shipped within 1-2 working days after full payment is received.
- The delivery to most of the countries will take 2-4 weeks, if there\'s no problem when pass through the customs.
- We only accept your address. Please make sure payment address in PayPal is correct.
- Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy.
- The extra fee occured when the product pass through the customs should be paid by buyer
- If you can\'t receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
- We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
- If you don\'t satisfy with our product,please help to post our product back to us.You should pay the post back postage.After we receive our product,we promise to payback 100% of your money.
- We sell Electronic Components including Capacitors, Resistors, LEDs, Transistors, IC\'s, Bridge Rectifiers and other hard to find parts.
- We can also provide customized design and manufacture services.
- If you have any questions, please feel free to leave us message or email us directly!
- All messages will be replied within 1~2 business days except weekends and holidays.
- Please do not leave negative response or open a case before you contact us.
- Many thanks for your understand
Related Items:
Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/store/relateditems.php on line 72
