When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Instructions:
The board and plastic panels fixed column compartment and lock nut
Connect the power supply according to the drawings and load control line
By drawing on the chassis opening 70 * 50mm, then tighten the screws after the thermostat embedded Paste Mask
After power if the temperature in the interval starts immediately output to stop off value
Start temperature stop temperature = cooling mode
For example, want to control greenhouse cooling, ventilation fans start when higher than 35 degrees, down 32 degrees when you stop, you start value should be set to 35, stop value is set to 32
SET Function keys / Off button:
In the boot state press SET 3s can shutdown, shutdown if the power remains off
Press SET to power in the off state, after boot if the power remains switched on
Short press SET to switch module temperature intermittent operation → → → reservation Power Off Timer (F1-F3 function independently, with the temperature does not matter, do not need to be able to do)
Left F-1 intermittent operation mode in minutes start minute, the right to stop minute
F-2 hour timer switch to the left, to the right minutes, maximum 99 hours 59 minutes
F-3 power appointment hours left, the right minutes, maximum 99 hours 59 minutes
Temperature correction: Unplug thermostat hold the SET power plug into the temperature correction function, the screen display --000-- can subtract the temperature at temperature before correction on the basis of the maximum range -9.9 to 99,
After the calibration is complete: real-time temperature = temperature before correction + correction
Press and hold the (Start + -) power-on self-test function into
Press and hold (Stop + -) power to restore the factory settings
Reset:
If errors or confusing settings, press and hold the power button to stop two restore factory settings
88-888-88 display, buzzer flute sound, complete recovery
Temperature range: -55- + 120℃
Temperature measurement accuracy: ± 0.3℃
Resolution: 0.1℃
Temperature range: -19 ~ 99℃
Control accuracy: 1℃
Temperature probe: NTC10K / B3950 comes standard with 1 meter waterproof probe
Supply voltage: 100-240V
Temperature: -25 ~ 55℃ Humidity 20% -85% (non-condensing)
Output Type: 10A relay outputs
Size: 90*60mm/3.54”*2.36”
Hole size: 70*50mm/2.76”*1.96”
Color: black
Package includes:
1 x Digital LED Temperature Controller Thermostat Control Switch
Monday- Saturday (Greenwich Time 2:30A.M-11:30A.M ) ( Pacific Time:6:30P.M-3:30A.M)
Rare Vintage 1996 Yu-gi-oh Black Digital Watch New Old Stock In Original Box
$298.00
Improved Combat Shelter Repair Kit & Stakes USGI ACU
$24.99
Built-Ford-Tough Black Digital Tire Pressure Gauge with LED-Backlit LCD Display
$17.99
Popular Forums