When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
BEST VIEWED USING GOOGLE CHROME BROWSER
MAX TCR A/B
Thick Casting Resin
2 GALLON COMBINED VOLUME
1 GALLON OF RESIN
1 GALLON OF CURING AGENT
FAUX WATER EPOXY RESIN FOR FLORAL ARRANGEMENT
2 GALLON BULK KIT AT $0.52 PER FLUID OUNCE
MAX TCR A/B is very clear and low viscosity resin system that offers a very long working time. It is very flexible and resilient upon cure offering excellent adhesion to containers or vases made from glass, ceramic, clay, stone pottery and other materials commonly used in silk floral and artificial plants arrangements.
Its mix ratio is equal parts by volume or weight allowing ease of use.
The long working time provides de-airing of mixed or entrapped air bubbles during mixing and casting. It can be mixed in a large mass of up to 2000 grams without generating high exothermic heat. The peak exothermic temperature of a 2000 gram mass (about ½ gallon of volume) achieved a maximum heat of 135ºF
All polymers have an intrinsic physical property known as CTE (Coefficient of Expansion and Contraction), which its dimensional expansion and contraction based on the temperature it is exposed to. If the CTE of the polymer is lower than the structural strength of the glass, such as thin-walled glass vases, breakage will occur when it is exposed to sudden or repeat ambient temperature changes.
A tack-free cure is achieved in 48 hours of room temperature cure.
Upon cure, the MAX TCR A/B is very flexible eliminating breakage of the glass vase typically caused by the differential Coefficient of Expansion and Contraction of the cured polymers.
By ensuring that the CTE value or rate of expansion and contraction is higher (flexible) value than glass, internal stresses that can shatter the glass container can be averted.
1:1 MIX RATIO AND LOW VISCOSITY FORMULATION
PROVIDES WATER CLARITY
LONG WORKING TIME
LOW ODOR, LOW TOXICITY RESIN SYSTEM
LOW EXOTHERMIC HEAT GENERATION DURING LARGE MASS CASTING
SELF-LEVELING
CURES TO A BUBBLE FREE CASTING
BONDS TO GLASS VASES, PLASTIC & ARTIFICIAL FLORAL ARRANGEMENTS
ALLOWS EXPANSION AND CONTRACTION OF THE CASTING PREVENTING GLASS VASE BREAKAGE
NEED MORE INFORMATION?
Please visit our YouTube Channel to view our video demonstrations
PolymerProductsPCI on YouTube
MAX TCR THICK CASTING RESIN FOR FLORAL ARRANGEMENTS - YouTube
Video will open in a new window
[isdntekvideo] FLUID GALLON VOLUME CONVERSION1 GALLON =231 CUBIC INCHES=
1 GALLON =128 OUNCES
1 GALLON=3.7854 LITERS
1 GALLON=4 QUARTS
1 GALLON=16 CUPS
FLUID GALLON MASS CONVERSIONS1 GALLON OF MIXED UNFILLED EPOXY RESIN =9.23 POUNDS
1 GALLON OF MIXED UNFILLED EPOXY RESIN =4195 GRAMS
1000 Grams of MAX TCR A/B mixture
SHORE DUROMETER 55A
COLOR STABILITY COMPARISON AFTER 3 YEARS
MIXING EPOXY RESINS
PLEASE VIEW THE FOLLOWING VIDEO PRESENTATION,
ALTHOUGH THE FEATURED EPOXY RESIN SYSTEM IS DIFFERENT THAN
THE MAX TCR A/B,THE GENERAL TECHNIQUE AND PROPER MIXING PROCEDURE IS APPLICABLE.
USE THIS MIX TECHNIQUE TO ELIMINATE TACKY SPOTS,UNCURED SECTIONS AND POOR MECHANICAL PERFORMANCETHAT IS CAUSED BY POOR MIXING AND INCORPORATION OF THE RESIN AND CURING AGENT.
GENERAL MIXING PROCEDURE
The featured resin system in this video is our MAX CLR resin system, which may different than the resin system being sold, however, itwill demonstrate
the basic technique in mixing two component resin systems and obtain the best result and ensure ahomogeneousmix.
EVIDENCE OF POOR MIXING
Mixing epoxy resins -2 cup method - YouTube
Video will open in a new window
[isdntekvideo]PROPER MIXING TECHNIQUEPROPER EPOXY MIXING TECHNIQUE - Avoid tacky or uncured spots and low air bubble mixing - YouTube
Video will open in a new window
[isdntekvideo] AIR BUBBLE REMOVAL TECHNIQUEHOW TO REMOVE AIR BUBBLES FROM AN APPLIED EPOXY COATING, ALSO HELPS WITH LEVELING AND FLOW - YouTube
Video will open in a new window
[isdntekvideo]DON\'T FORGET OUR EPOXY MIXING KIT
Proportioning the correct amount is equally as importantto attain the intended cured properties of the resin system.
The container in which the epoxy and the curing agent is mixed is an important consideration when mixing an epoxy resin system.
The container must withstand the tenacity of the chemical and must be free of contamination.
The most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be wornwhen handling chemicals of the same nature.
MIXING KIT CONTENTS
4 each 32-ounce (1 Quart) clear HDPE plastic tubs
4 each 16-ounce (1 pint) clear HDPE plastic tubs
4 each clear HDPE Plastic Lids for the plastic tubs
4 each 8ounce (1/2-Pint) Wax Free Paper Cups
5 pairs one size fits all Powder Free Latex Gloves (Large)
6 Piece HDPE Plastic Measuring Spoon Kit
(1 tablespoon to 1/8 teaspoon)
10 Piece HDPE Plastic Measuring Cup
(1 Cup to 1/8 Teaspoon)
2 each None Sterile Graduated 10 cc Syringes
1 pack of Wooden Stir Sticks (Disposable Chopsticks)
1 pack Assorted Size Bristle Brush (5 per pack)
Forour complete listing, please Visit our store!
For Technical Support
Please Call Toll Free
877 403 8008
Mon-Fri
10:00 AM to4:00 PM
Pacific Standard Time
NEED MORE INFORMATION?
Please visit our YouTube Channel to view our video demonstrations
PolymerProductsPCI on YouTube
PLEASE CHECK OUT OTHER AVAILABLE RESIN SYSTEMS AT OUR store Forour complete listing, please click thelogoIMPORTANT NOTICE
Your purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.
The user should thoroughly test any proposed use of this product and independently conclude satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user\'s responsibility to determine this Composites fitness for use. There is no warranty of merchantability of fitness for use, nor any other express implied warranty. The user\'s exclusive remedy and the manufacturer\'s liability are limited to therefund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representativewill not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether er there is any infringement of patents is the sole liability of the user.
$15.00
Wall Hanging/ Epoxy Resin / Pine Cone /Epoxied Charcuterie Board / Art By Essa
$240.00
Wall Hanging/ Epoxy Resin / Pine Cone /Epoxied Charcuterie Board / Art By Essa
$240.00
Popular Forums