EZM328(GM328R)2016 transistor tester/ frequency meter / square wave genera For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
EZM328(GM328R)2016 transistor tester/ frequency meter / square wave genera:
$14.45
EZM328(GM328R)2016 transistor tester/ frequency meter / square wave genera
- Features:
Add function :
Rotary coding switch
Rotating menu
Frequency meter interface
Precision reference source.
I. Overview
1 using the 2016 version of the latest V1.12K software, using M328 chip,, more features, in addition to the basic functions, as well as extensions.
2 micro-controller uses 8MHz external crystal, the measurement accuracy is better.
3 affect the accuracy of the relevant resistance using a thousandth of a metal film resistors, and the remaining one percent is also used metal film resistors.
4.LCD using 12864 LCD screen that can display measured data and graphics.
5 main chip dual in-line and with a socket, ideal for electronics enthusiasts upgrade or replace the chip.
6 uses 9V laminated battery.
7 All components are made ??of high quality genuine. LCD screen for low power backlit screen, the backlight current of about 2mA, so after boot time has backlighting for easy use in the dark.
8 Dimensions: 72 (W) X 85 (high) X22 (depth) mm.
9 Weight: about100grams.
The Working Current: 9V voltage, stable operating current of about 20mA.
A, the basic function
1 one-button operation, automatic shutdown.
2 shutdown current is only about 20nA.
3.Adopt 8MH crystal.
4 can automatically detect NPN, PNP bipolar transistors, N-channel and P-channel MOS FET, JFET, diodes, dual diode, thyristor small power unidirectional and offerirectional thyristor.
5 automatic identification pin arrangement of components.
Current amplification factor and base 6 measuring bipolar transistor - emitter threshold voltage.
7 can be extremely via the base - emitter threshold voltage and high-current amplification factor identification Darlington transistors.
8 protection diodes can detect bipolar transistors and MOS transistors.
9 measuring MOS FET gate threshold voltage and gate capacitance.
10. can simultaneously measure two resistors and resistor symbol is displayed. 4-digit display with decimal value 11 on the right. Resistance symbol is displayed on both sides of the pin number. So you can measure the potentiometer. If the potentiometer wiper position will not be transferred to a certain extreme, we can distinguish between the middle and both ends of the pins.
11 resistance measurement resolution is 0.1 ohms, 50M ohms can be measured.
12 can measure capacitance. Capacitor symbol is displayed on the right display values ??can be displayed with a decimal four values. Can measure the capacitance of 30pF-100mF resolution 1pF.
13.2uF more capacitors can measure the value of the equivalent series resistance The two values ??can be displayed with a decimal, resolution 0.01 ohms.
Two diodes 14 can be displayed in the correct order and a diode symbol, and gives the diode forward voltage.
15.LED is detected as a diode, a higher forward voltage. Combo of the LED is recognized as two diodes.
16. reverse breakdown voltage is less than 4.5V zener diode can be identified.
17 can measure a single diode reverse capacitance. If the connection base and collector of the bipolar transistor or the emitter of a pin, or the reverse can be measured or the collector junction capacitance of the emitter junction.
18 with a single measurement can get connections rectifier bridge.
19 Although the measurement limit capacitance of 25pF, but you can be measured by the measured capacitance with a known volume of at least 25pF capacitor in parallel, then the measure will result in parallel capacitance obtained by subtracting
B. extensions (via menu selection, and the user may want to add a few components, suitable for DIY)
1 can measure 1Hz-2MHz frequency. Above 25kHz resolution of 1Hz, the low-frequency measurements using the cycle, the resolution can go to 0.001MmHz.
2 can measure DC voltages below 50V.
3 can produce a square wave signal of 1Hz-2MHz.
4 can generate a fixed frequency pulse width but variable pulse wave, short key width by 1% increments, the longer the key width by 10% increments.
5. Can be activated by the individual capacitance and menu functions, ranges 2UuF-50mF, since the amplitude of the measured signal is only 300mV, it is possible to measure the road. (Translation: due to non-4-wire measurement, the measurement lead resistance may lead to large errors, particularly small measurements).
6 by adding a rotary coding switch, convenient menu item selection.
- Package Included:
1x DIY KITS EZM328(GM328R)transistor tester table / LCR / frequency meter / square wave genera
1X CABLE
3XClip
- Kindly ensure that your delivery address in & Paypal are the same to avoid delivery failure. Any non-received item caused by invalid address is not eligible for refund or replacement. Please ensure your purchased item(s) can be lawfully imported into and complies with all laws and regulations of the destination country.
- IMPORTANT NOTE: Custom duty is obligation and liability. Buyers are responsible for import duties, custom fees and taxes, if any. Kindly check with your country’s custom office to determine the additional costs impose on the item prior to purchase. We are NOT responsible for the additional costs incurred related to import duties, custom fees and taxes.
- Please leave a note in ONLY if you got special request (e.g. colour). Kindly note that special request is subject to availability; we does NOT guarantee for random ship items. response
- We accept PayPal payment only, and must be received within 3 days from the date of purchase.
- Please leave note in PayPal when making the payment if you have any special requests.
- Orders will be processed instantly and dispatched within 1-2 days, so we do NOT accept any email/message note after you place orders.
- IMPORTANT! PLEASE READ! Buyers are responsible for import duties, custom fees and taxes, if any. Please check with your examine your parcel upon receiving your purchase and inform us via message of any damage/defects with clear photographs/pictures/videos as proof within the first 24 hours upon receiving your purchase. NO claims will be liable or entertain after this time period. If you are not happy with your purchase for valid reason, you can return the product to us within the first 14 days after receiving the product. All shipping charges (both ways), handling and packaging costs will be charged to the buyer.
- The product must be sent back to us in original condition with no defect (new, unused and unopened) within first 14 days of receiving the product.
- No scratches, damages whatsoever & No altering of any part of the item.
- Original box/documentation/accessories (if any) and packaging.
- Buyer is responsible for return shipping cost.
- Please allow up to 5 working days to process your return items.
We will greatly appreciate your positive response and all 5-star DSRs.
If we have not given you reason enough for 5-star grades on each DSR, please let us know how we can earn your 5 star rating before submitting your scores.
Related Items:
Warning: Invalid argument supplied for foreach() in /home/bbforums/public_html/store/relateditems.php on line 72
