When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Brand new in sealed packaging. Fresh stock
Product Overview
Model OOHC941 is an advanced, multi-criteria fire / CO detector that incorporates a redundant, optical / thermal sensor with a carbon monoxide (CO) sensor. Model OOHC941 uses a unique forward / backward light-scattering technology providing state-of-the-art,
unparalleled fire detection to the widest range of fire types.
For instance, the detector can utilize the optical, heat and CO sensors together for enhanced fire detection (multi- criteria), as well as simultaneously provide independent
outputs for CO gas life-safety and heat detection. Any combination of the sensors is possible. The detector is
extremely versatile and meets the following standards:
Intelligent Detection Devices Multi-Criteria Fire / CO Detector [with ASAtechnologyTM] Model OOHC941
ARCHITECT AND ENGINEER SPECIFICATIONS
Advanced multi-criteria fire detector that has optical, thermal and CO sensors
Differentiates between deceptive phenomena and an actual fire (nuisance-alarm avoidance)
Provides enhanced detection via forward-and-backward light-scattering technology
Supervisory feature for temperature and CO-concentration-threshold monitoring
UL Listed and FM Approved as a multi-criteria and ‘VEWFD’ fire detector
Complies with NFPA 76 (Telco standard) as ‘VEWFD’ high-sensitivity detector
Compatible with Siemens Model ‘H’-series devices on the same loop
Low-temperature warning for sprinkler systems, per NFPA 25
UL 268A Listed for direct air-duct (4,000 FPM) use
Remote sensitivity-measurement capability
Tri-color detector status LED with 360° viewing
Environmental alternative to ionization detectors
Polarity insensitive utilizing SureWireTM technology
Responds to both flaming and smoldering-fire signatures
Compatible with legacy Model DB-11 series mounting bases
Compatible with Model 8720 / DPU (device programmer / loop tester)
Meets UL, NFPA 72 sensitivity self-monitoring requirements
Automatic environment compensation
Up to 26 application profiles
UL 2075 and NFPA 720 CO life-safety compliant
UL 268 / RoHS compliant
UL Listed,
ULC-S529 Listed (for smoke detection) / ULC-S530 Listed (for heat detection);
FM (#3230, 3210) Approved, and CSFM (#7272-0067:0258) Approved
Model OOHC941 is programmable as a high- sensitivity detector, and meets the requirements of NFPA 76 Standard (for the Fire Protection of Telecommunications Facilities) as a Very Early Warning Fire Detector (VEWFD).
The Model OOHC941 detector is a flexible, multi-purpose detector, providing a complete solution to meet fire and CO life-safety gas-detection needs. The Multi-Criteria Fire / CO Detector can be field programmed for simultaneous and / or independent functionality, depending on the exact customer and application requirements.
Product Overview (continued)
• Multi-criteria fire detector ( UL 268)
• Carbon Monoxide (CO) Gas detector ( UL 2075) •Heatdetector( UL521)withfive(5)possible
field-selectable temperatures; combined with
four (4) rate-of-rise options
• Direct in-duct (plenum) detector ( UL 268A)
• Supervisory monitoring for CO levels and
temperature ranges
• NFPA 76 (Telco Standard) as VEWFD
• Low-temperature warning signal at 40°F (4.4°C)
for sprinkler systems, per NFPA 25 / NFPA 72
Model OOHC941 which provides extremely accurate and reliable fire detection with built-in redundancy utilizes advanced, multi-criteria detection technology known as ASA (Advanced Signal Analysis) that allows the detector to distinguish non-threatening deceptive phenomena.
For instance, the signals from the detector’s sensors are monitored and processed via the ASA-patented algorithm technology, which combines the signals into a neural network to create an intelligent, multi-criteria detector.
The encompassing result is a detector that provides enhanced detection to a wide range of products of combustion while offering unsurpassed rejection to nuisance-alarm sources, such as: dust, steam, aerosols and other deceptive phenomena that could cause false alarms.
Since the multi-criteria, CO detector is a (2) two-wire, addressable device, it is then able to function as a multi- purpose detector satisfying fire, heat and carbon monoxide (CO) gas detection in a singular, aesthetically pleasing package. Further, Model OOHC941 serves as an extremely cost-effective, viable solution that saves product, installation and maintenance costs (compared to other multiple-detector alternatives). Each detector fits into one (1) wall-or-ceiling footprint, and only occupies one (1) address on the signal-line circuit (SLC).
A patented forward-and-backward, light-scattering technology which is able to distinguish both small and large products of combustion operates at the core of each Model OOHC941 detector.
Additionally, each Model OOHC941 provides an environmental-friendly solution to ionization detectors, eliminating the need for a radioactive source and eventual disposal requirements. Thus, each detector is capable of detecting both smoldering and flaming fire all in ecologically efficient manner and is a valid, RoHS- compliant (Restriction of Hazardous Substances) detection alternative to ionization detectors.
Two (2) thermal sensors and an electromechanical CO sensor are also included, making each Model OOHC941 detector a robust, reliable device suitable for the most challenging applications. ModelOOHC941alsoworksasacarbon monoxide (CO) life-safety gas detector, compliant with NFPA 720 and UL 2075.
Operation
Forward-and-Backward Light-Scattering Technology (with CO sensor)
1. Heat sensors
2. Receiver
3. Backward scatterer
4. Forward scatterer 5. Labyrinth
6. CO sensor
The high-quality, optical-electronic measuring chamber for each Model OOHC941 houses the following components:
Two (2) optical transmitters One (1) optical receiver
Two (2) thermal sensors One (1) CO sensor
The transmitters illuminate the smoke particles from different angles: asabackwardscatterer. Thescatteredlightthenhitsthe receiver (photodiode) and generates a measurable electric signal. facilitates optimum detection, as well as differentiates between light-and-dark particles / particle size.
This type of detection creates standardized, responsive behavior and optimizes the differentiation between wanted signalsanddeceptivephenomena. Inaddition,theheat sensors make it possible to detect fires without smoke generation.
The CO sensor enables faster detection of fires with incomplete combustion, as well as fires with the development of high levels of CO. The combination of optical, thermal and CO sensor signals optimizes detection reliability.
Field-Device Programmer / Test Unit
Model OOHC941 is compatible with the Device Program / Test Unit accessory, which is used to program and verify the address ofthedetector. mode, and enters the desired address. Model 8720 / DPU automatically sets and verifies the address and tests the detector.
Model 8720 / DPU eliminates the need for cumbersome, unreliable mechanical programming methods such as dials or switches and reduces installation and service costs by electronically programming and testing the detector prior to installation.
Model 8720 / DPU operates on AC power or rechargeable batteries, providing flexibility and convenience in programmer and testing equipment from practically any location.
When in ‘test’ mode, Model 8720 / DPU will perform a series of diagnostic tests without altering the address or other stored data, allowing technicians to determine if the detector is operating properly.
Field-selectable application profiles
Model OOHC941 provides 26 user-friendly, field-selectable application profiles, indentified with universally known names (e.g. Hotel, Telco, Office, Parking Garage, Dormitory, and DataCenteretc.) Refertoinstallationmanual: P/N A6V10324657 for a complete list and description of application profiles.
Due to generic-name classification, no cross-reference tables are required as the application name resides in the panel’s configuration tool. This user-friendly feature along with the algorithms provided by ASAtechnology provides a reliable, field-configurable detector suitable for an array of applications.
Field-selectable temperature settings
Model OOHC941 provides five (5) field-selectable temperature thresholds,rangingfrom135°F to175°F(57°Cto79°C),with fixedandrate-of-riseoptions. Theserangesprovidemaximum flexibility to program and easily adjust the temperature settings that suit multiple application needs within a building or changing environmental conditions.
1PCS Brand New Siemens Gas Burner Program Controller LFL1.333 Serie 02 #A
$309.81
New Siemens LFL1.635 burner program control boiler with gas burner
$328.29
New Siemens LFL1.635 burner program control boiler with gas burner
$347.28
Popular Forums