New 1 Gallon Vacuum Chamber and 2.5 CFM Dual Stage Pump Degassing Silicone Kit For Sale

New 1 Gallon Vacuum Chamber and 2.5 CFM Dual Stage Pump Degassing Silicone Kit
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

New 1 Gallon Vacuum Chamber and 2.5 CFM Dual Stage Pump Degassing Silicone Kit:
$119.95

This is a complete vacuum chamber kit designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #9,475,627) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used!

The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2.5inHg/24hrs.


NOTICE: HANDLE FREE DESIGN! (Handle leaks wont happen Here!)


Chamber Lid May Or May Not Have Logo Etched onto the top.

This Kit Includes:
• (1) 304 Stainless Steel Chamber (Made in USA)

• (1) Polycarbonate Lid 1/2\" Thick (Made in USA)
• (1) Industrial grade silicone gasket
 - Gasket can withstand 390F max temp.
 - 60A durometer density
• (1) Glycerin filled vacuum gauge (must be regulated upon arrival)
 - Max vacuum -29Hg (+/-.5Hg) at sea level
• (1) Leak free nickel plated air manifold
 - Vacuum release valve and vacuum connect valve
• (1) 1/4\" Vacuum Hose
• (1) 6\" Platinum cured silicone non stick VacPad®
• (1) 50 Micron air filter


Internal Dimensions:
7-5/8\" Tall x 6-3/8\" Diameter



Compatibility Explanation:
•SVacchambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents.


Pump Facts:
• We recommend the oil is changed every 50-75 of operating hours. Using Vacuum Pump Oil.
• CFM is a measure of cubic feet per minute.
• Single stage pumps reach a max vacuum of 50-75 microns (0=complete vacuum).


See FAQ at the top for product safety warnings.


•Customers using solvents such as stabilization resins (Cactus Juice™, MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunctionwith a cold trap for evacuations in excess of 5 minutes.
•If the consumer is using the pump for prolonged periods of time exceeding 5 minutes with any of the above solvents,we require that a cold trap is used or the pump warranty is void.
•Wood Stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motorvoiding all warranties.
•Wood Stabilization resins, alcoholand polar solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vaporspriorto making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps,EVER.(A seized motor will result within the first use.)

•Changing the Oil Every use when using chemicals is a good practice to protect your equipment.



Buy Now

Related Items:

GL1-001 New York City Transit Police Department Thin Blue Line Challenge Coin picture

GL1-001 New York City Transit Police Department Thin Blue Line Challenge Coin

$19.99



DL1-16 new Version 2 Dispensary Container CSP Challenge Coin inspired by Connect picture

DL1-16 new Version 2 Dispensary Container CSP Challenge Coin inspired by Connect

$24.99



NEW 7 1/16

NEW 7 1/16" Metal Dome Lamp Light Shade Pendant Blue Porcelain Industrial Style

$41.82



Popular Forums