Plans to build a hyrdaulic wood splitter/firewood processor sale price For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Plans to build a hyrdaulic wood splitter/firewood processor sale price:
$16.95
MILLERS WOODCUTTING FIREWOOD PROCESSOR
demo video available at buy a splitter when you can build a complete processor for about the same price?
Why pay nearly $10,000 dollars for a firewood processor when you can make your own for less than $2500?
You are offerding on aCD containing a demonstration video and plans for the construction of a firewood processor.This machine is a hydraulically operated processor. The completed machine loads the log, cuts the log, and splits the round (4 way splitter). The operator need only roll the log onto the log loader, roll the log off of the log loader, then operate a hand crank and hydraulic levers.
Overall Length: 13 feet Powered = 10 HP or larger gas engine
could easily be converted to PTO drive
Weight estimate of 1400 lbs.
Dimensions (length, width, cutting bar etc.)
Cutting Table Length: 8 feetcould easily be enlarged to fit your personal
needs.
Log Capacity: 20 inch diameter_
Firewood Length:up to 22 inches____
Productivity: 1 cord every1 1/2hours depending on
diameter.
PLANS INCLUDE SPECIFIC ITEMS LIST FOR ALL HYDRAULICS COMPONENTS including suppliers and part numbers
The plans are in Pdf. Document format and should run on any computer with windows 98 or newer. The plans include a detailed bill of materials, step by step instructions with over 70 digital photos and diagrams of the prototype being made. Plans are 42 pages long, very detailed and easy to follow.
Construction of the processor is simple requiring minimal metalshop tools and skills. The prototype was built by a high school welding class. Because some of the parts for the original were scrap, already owned, or purchased for less than new price off of e-bay (good source for hydraulic components) the cost of construction was about $1600. Estmate for construction if all items bought new is $2500. I estimate that ittook about 60 hours of labor to make it.
The machine is simple to make needing only a welder, cutting torch, and drill press. Hand grinder, and cut off saw are helpful but not a necessity.
All firewood cutters, small farms, and individuals who cut a lot of firewood should have one of these machines.
On reciept of paymenta CD will be mailed within 2 business days to the winning align=\"center\">To see the machine in operation and for a sample of the plans go to www.millerswoodcutting.com
Currently my company has sold plans to 49 US States, and18 Foreign Countries
Related Items:
Plans to build a 12 or 14 inch Lapidary Rock Saw (please read description)
$39.95
1941 JUNE 7 NEW YORK TIMES - U. S. PLANS TO TAKE OVER N. A. AVIATION - NT 1348
$45.00
Framed plans to Star Wars Millennium Falcon with Han Solo modifications
$18.99
