When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Solid State 83 for Tube Testers
As type 83 mercury vapor tubes are getting scarce & expensive, the need for a good solid state replacement was becoming apparent. This replacement contains 2 diodes, 2 zener diodes for regulation and proper voltage drop and 2 resistors that when combined emulate a real type 83. It is built on a circuit board and placed in a new 4 pin tube base. It was then checked to ensure balance between both sides. This will work in any tube tester that uses a glass 83 rectifier. I have sold hundreds of these with 100% positive response.You will not find a better 83 replacement anywhere.
I did a series of tests on my newly rebuilt and calibrated in August 2014 TV-7A/U by Dan Nelson. Here is how it compared to a glass 83:
Test results
Glass 83 SS83R
6V6GT 89 88
12AX7 44 & 42 44 & 42
01A 26 26
807 89 89
This test was also done on a Hickok 800A with repeatable results. No calibration was needed to get correct test results on either tester. The only adjustment done to the testers was a veryslight line control setting.
Other SS replacements I have tried that were made way back in the 1970s (1N2634) often made correct line adjust impossible and test results were way off because of improper voltage drop.
I sometimes forget to turn off my tester so it can run overnight and asthe 83 tube wears out, the calibration on the tester changes. The SS83R ( solid state 83 regulated) does not wear out.
Less power draw and way less heat on tester transformer and other parts so longer tester life before recalibration.
Pictures tell the rest of the story and are part of the cosmetic description so please take a close LOOK.at them. WYSIWYG
Please ask any questions before you offer to avoid any communication problems or disappointments.
This is a hassle free 60-day money back or replacement guarantee sale.
Why Buy From Elderly Electronics:
We know you have thousands of choices when it comes to purchasing vintage electronics on . Our main goal is customer satisfaction and to help you revive that special piece of equipment with quality tubes, parts and manuals. Our response speaks for itself.
Tube testers we use include but are not limited to:
Triplett 3444 laboratory grade with digital milliamp meter. Rebuilt with precision calibration by GC Industries in October 2015. Used for testing Pre-amp and power tubes.
Amplitrex AT-1000 digital tube tester, the world\'s most accurate vacuum tube tester.
TV-7A/U Military tube tester with digital meter. Rebuilt and calibrated by Dan Nelson June 2015. Used for testing rectifiers and radio tubes.
Sencore TC162. Used for finding that troublesome shorted or leaky tube.
Tube pre-heater. Custom built and used for warming up and stabilizing pre-amp and power tubes for at least 5 minutes.
All testers are regularly checked for calibration to ensure accurate test results.
Thank you for visiting our sale
Wash Cloth Towel Set 12x12 Cotton Blend Bulk Pack 12,24,48,60,120,480,600 Towels
$219.99
3 pack 100% SOLID BRASS 3.15" High Polished One Hitter Bats Dugout Pipe onie USA
$19.95
TWO SOLID BRASS ONE HITTER PIPES* BASEBALL BAT / TRUMPET COMBO *USA MADE 2-1/2"
$19.89
Popular Forums